II - DCE FEL ČVUT v Praze

Index
Transducers, insulated, 3-23
Transfer area, client, 4-30
Transient recovery time, analog output, 3-39
Transmission rate, Glossary-12
Trigger
parameter block, 4-11
SM 331; AI 2 x 0/4...20mA HART, 4-11
Two-wire transducer
connection, 3-34
measuring ranges, 3-65, 4-15
two-wire transducer, 4-11
Type of output, SM 332; AO 4 x 0/4...20 mA,
3-44
U
User data, 4-12
HART analog module, 4-25
User data area, HART analog module, 4-9
User data format
HART analog input, 4-37
HARTanalog input, 4-38
V
Value, default, 3-44
Voltage measurement, 3-57
measuring ranges, 3-57
Voltage sensor, 3-22
W
Watchdog triggered, SM 321; DI 4 x NAMUR,
2-11
Index-10
Wire break
enable, 2-20
SM 321; DI 4 x NAMUR, 2-11
SM 322; DO 4 x 15V/20mA, 2-22
SM 322; DO 4 x 24V/10mA, 2-22
SM 331; AI 2 x 0/4...20 mA HART, 3-47
SM 331; AI 4 x 0/4...20 mA, 3-47
SM 331; AI 8 x TC/4 x RTD, 3-47
SM 332; AO 4 x 0/4...20 mA, 3-49
Wire break check, 3-71
SM 331; AI 8 x TC/4 x RTD, 3-57, 3-65
Wire break monitoring, 2-8, 3-42, 3-43, 4-11
enable, 3-44
HART analog input, 4-16
SM 331; AI 8 x TC/4 x RTD, 4-21
Wire-break monitoring, SM 331; AI 2 x
0/4...20mA HART, 4-15
Wiring
ET 200M, 1-12
M7-300, 1-11
S7-300, 1-9
Wiring and cabling
cable bedding, 1-19
Ex system, 1-16
Wiring diagram
SM 321; DI 4 x NAMUR, 2-3
SM 322; DO 4 x 24V/10mA, 2-15, 2-24
SM 331; AI 4 x 0/4...20 mA, 3-64
SM 331; AI 4 x 0/4...20mA HART, 4-17
SM 331; AI 8 x TC/4 x RTD, 3-55
SM 332; AO 4 x 0/4...20 mA, 3-69
SM 332; AO 4 x 0/4...20mA, 4-22
I/O Modules with Intrinsically-Safe Signals
C79000-G7076-C152-04