AGREEMENT between BROWARD COUNTY and Cummings ...

DIVISION 1 SPECIFICATIONS - SECTION 01039 COORDINATION OF WORK
Exhibit 2
Page 213 of 379
B. The CONTRACTOR, having vast experience in the construction of improvements
in South Florida, recognizes that unforeseen conditions occur and that as a
normal course of construction there may be rain days, difficulties in obtaining
materials and labor, requests for information from the CONTRACTOR to the
CPM or CONSULTANT (Architect/Engineer), submittals, shortages and
inefficiencies in operations.
1.04 DISCREPANCIES, INTERPRETATION AND OMISSIONS
A. Any doors shown on the Drawings but not scheduled shall be assumed to be
identical to the nearest door of similar size and type for purposes of bidding and
construction. Bring any apparent discrepancies to the attention of the
PROGRAM MANAGER for interpretation prior to commencing with the Work.
B. Any room, wall, floor, or ceiling finish not scheduled shall be assumed to be
identical to the nearest room of similar use and type for purposes of bidding and
construction. Bring any apparent discrepancies to the attention of the PROGRAM
MANAGER for interpretation prior to commencing with the Work.
C. Should conflict occur between the Contract Documents, the CONTRACTOR is
deemed to have based his bid upon the more expensive method of performing
the Work unless he has requested and received a written decision from the
PROGRAM MANAGER before submission of his bid.
D. The term “artistic effect” as used herein refers to color, texture, profile, and
relation of masses. The CONSULTANT shall be the sole interpreter of the
design intent with respect to such matters, but the CONSULTANT’s authority with
respect thereto shall not circumvent any other rights of either the COUNTY or the
CONTRACTOR ascribed to them by other provisions of the Contract.
1.05 DEFINITIONS
A. Products: Means new material, machinery, components, equipment, fixtures, and
systems forming the Work, but does not include machinery and equipment used
for preparation, fabrication, conveying and erection of the work. Products may
also include existing materials or components required for reuse.
B. Furnish: To supply and deliver, unload, inspect for damage (same as supply).
C. Install: To unpack, assemble, erect, apply, place, finish, cure, protect, clean, and
make ready for use.
D. Provide: To furnish or supply, plus install.
Section 01039 Coordination of Work Page 8