AGREEMENT between BROWARD COUNTY and Cummings ...

Exhibit 2
Page 311 of 379
DIVISION 1 SPECIFICATIONS
SECTION 01540 CONSTRUCTION SAFETY PLAN AND SECURITY REQUIREMENTS
Subcontractor vehicles authorized to operate on the site and shall issue a
permit to each vehicle to be made available upon demand by the CPM or
any Airport Security Officer. Vehicle permits shall be assigned in a
manner to assure positive identification of the vehicle at all times. In lieu
of issuing individual vehicle permits, the CSO can require each vehicle to
display a large company sign on both sides of the vehicle and advise the
COUNTY through the CPM of a current list of companies authorized to
enter and conduct Work on the Airport.
4. EMPLOYEE PARKING:
a. Area for parking of the CONTRACTOR’s employee’s vehicles is in
the CONTRACTOR’s Construction Area as provided by the CPM.
Parking shall be accomplished in straight equally spaced rows.
CONTRACTOR shall organize traffic flow and parking patterns,
supply traffic control signs and markings, subject to the approval
of the CPM. The CONTRACTOR shall maintain the parking
surface and pick up trash daily. No storage will be allowed on the
parking site. The CONTRACTOR shall restore the shape and
grade of this parking area upon the job completion, see and mulch
portions where existing ground cover is damaged and perform all
Work required to restore the area to its original condition.
b. All vehicles that are parked in the CONTRACTOR’s Construction
Area shall have an identification sticker as directed by the CPM.
Stickers shall be supplied by the CONTRACTOR and state the
project number and CONTRACTOR’s name. Vehicles shall be
parked so that identification stickers are visible from the parking
lot driving lanes at all times. The CONTRACTOR shall provide
transportation for his employees from the parking area to the Work
site using company owned vehicles.
c. When the CONTRACTOR’s employees parking area is adjacent
to another CONTRACTOR’s parking area performing other
construction for the COUNTY, cooperation between Contractors is
required to avoid any interferences in the performance of each
others respective construction. Any difficulties experienced shall
be brought to the attention of the CPM immediately.
5. Materials Delivery to the Site: All Contractor’s material orders for delivery
to the Work site will use as a delivery address, the street name and
number assigned to the access point onto the airport.
6. Security Background verification, fingerprinting and identification badging
is required for all work conducted in Security Identification Display Areas
(SIDA). The prime contractor is responsible for managing, obtaining and
complying with all TSA and Airport security and badging requirements for
their own firm as well as all of their subcontractors on their team. The
prime contractor and all subcontractors are responsible for all costs
associated with complying with the terms and conditions of all security
requirement including but not limited to any fines levied (including against
BCAD) due to non compliance with SIDA or Airport Security rules.
PART 2 – PRODUCTS
(Not Used)
Section 01540 Construction Plan and Safety Requirements Page 106