AGREEMENT between BROWARD COUNTY and Cummings ...

DIVISION 1 SPECIFICATIONS
SECTION 01340 – SHOP DRAWINGS, PRODUCT DATA AND SAMPLES
requirements of project closeout information, materials, tools, and similar
items.
6. General Distribution: Provide additional distribution of submittals to
subcontractors, suppliers, fabricators, installers, governing authorities,
and others as necessary for the proper performance of the Work. Include
such additional copies in the submittals to the CONSULTANT where the
submittals are required to receive “Action” marking before final
distribution. Record distributions on transmittal forms.
1.06 CONTRACTOR’ DUTIES
A. Review submittals prior to transmittal; determine and verify field measurements,
field construction criteria, manufacturer’s catalog numbers, and conformance of
submittal with requirements of Contract Documents.
B. Coordinate submittals with requirements of Work and of Contract Documents.
C. Submittals or Accompanying Transmittal Letter Shall Contain:
Exhibit 2
Page 281 of 379
1. Date of submission and dates of previous submissions when applicable.
2. Project title and number.
3. Contract identification.
4. Names of subcontractor, supplier, and manufacturer.
5. Identification of product with Specification Section number.
6. Field dimensions, clearly identified as such.
7. Relation to adjacent or critical features of work of materials.
8. Applicable standards, such as, ASTM or Federal Specification numbers.
9. Identification of revisions on resubmittal.
10. Additional information required by Contract Documents.
11. CONTRACTOR executed review and approval marking or stamp.
12. Blank space for CPM’s and CONSULTANT’s action marking or stamp.
13. CONTRACTOR to carefully check all submittals and be responsible for
dimensions, quantity etc. necessary to make a complete project in
compliance with plans and specifications.
D. Clearly identify on submittals, or in writing at time of submission, deviations in
submittals from requirements of Contract Documents. CONTRACTOR’s
responsibility for deviations in submittals from requirements of Contract
Documents is not relieved by CPM and CONSULTANT’s review of submittals
unless CONSULTANT furnishes written recommendation of acceptance of
specific deviations to the CPM and the CPM provides written acceptance to
CONTRACTOR.
E. Apply CONTRACTOR’s mark or stamp, sign, and date, Signature of
CONTRACTOR’s authorized person certified verification of products, verification
of field measurements and field construction criteria, and coordination of
information within submittal with requirements of work and of Contract
Documents. Submittals without CONTRACTOR’s executed mark or stamp and
signature will be returned without disposition.
Section 01340 Shop Drawings, Product Data and Samples Page 76