AGREEMENT between BROWARD COUNTY and Cummings ...

Exhibit 2
Page 303 of 379
DIVISION 1 SPECIFICATIONS
SECTION 01540 CONSTRUCTION SAFETY PLAN AND SECURITY REQUIREMENTS
construction period, it is the CONTRACTOR’s responsibility to maintain each
Work area in a safe, hazard free condition at all times. This will include
barricades, fencing, taping up sharp corners or any other precautions necessary
to protect the Public. Should the COUNTY, CONSULTANT or CPM find the area
unsafe at any time, he shall notify the CONTRACTOR, and the CONTRACTOR
shall take whatever steps necessary to remedy the unsafe condition. Should the
CONTRACTOR not be immediately available for corrective action, the CPM may
remedy the problem and the CONTRACTOR shall reimburse the COUNTY for
the expense of such correction
B. Fire Control: Flame cutting will be permitted only on steel parts that cannot be
removed in any other manner and only when at least one person is standing by
exclusively with a fire extinguisher within ten (10) feet of the Work and within full
view of the area. The fire extinguisher shall have been tested and ready for use.
The CONTRACTOR shall submit a fire protection plan to the CPM for approval
prior to conducting the Work requiring said protection plan. A Hot Work Permit
may be required as directed by the CPM.
C. Work Near Fire Alarm: Caution shall be exercised as necessary when working
near fire alarms so as not to accidentally activate fire alarms, doors or barriers.
D
Protection of Property: Fixed structures, equipment, paving, landscaping and
vehicles (automobiles, trucks, etc.) shall be protected with drop cloths, shielding
and other appropriate measures to assure maximum protection of all property
and vehicles.
1.03 GENERAL SAFETY REQUIREMENTS
A. A construction/safety meeting will be conducted by the CPM after award of the
Contract and prior to commencing construction. Additional construction/safety
meetings may be scheduled as deemed necessary by the CPM throughout the
life of the Contract. Representatives from the CONTRACTOR, CONSULTANT,
CPM and any others deemed necessary by COUNTY or CPM, will attend. The
CONTRACTOR shall also conduct Safety/Security meetings as deemed
necessary by the CPM and three (3) copies of the minutes will be provided to the
CPM within five (5) calendar days of the meeting. All Contractor and
Subcontractor supervisors are required to attend.
B. The CONTRACTOR shall inform his supervisors and workmen of the airport
activity and operations that are inherent to this airport, the safety regulations of
the airport and the prohibition of driving or walking on any area of the Air
Operations Area (AOA) without clearance. The CONTRACTOR shall conduct his
construction activities to conform to both routine and emergency requirements, in
full compliance with the Federal Aviation Administration (FAA) Advisory Circulars
dealing with Safety and Security. The CONTRACTOR shall provide initial and
continuing instruction to all supervisors, employees, subcontractors and suppliers
to enable them to conduct their Work in a manner that will provide the maximum
safety with the least hindrance to air and ground traffic, the general public, airport
employees and to the workmen employed on the Site.
Section 01540 Construction Plan and Safety Requirements Page 98