AGREEMENT between BROWARD COUNTY and Cummings ...

DIVISION 1 SPECIFICATIONS
SECTION 01340 – SHOP DRAWINGS, PRODUCT DATA AND SAMPLES
a. Shop Submittal Number:
b. Deviations: None ; as listed
c. Reference Specification Number:
d. Reference Drawing Number: ______
e. Space Requirement: As designed _______
Different, As listed
f. Contractor has reviewed and submitted for review.
Signature:
Date:
E. ADDITIONAL COPIES:
1. Provide additional copies of submittals required by Governing Authorities
that are in addition to copies specified for submittal to the CPM and the
CONSULTANT.
1.05 SPECIFIC SUBMITTAL REQUIREMENTS
A. GENERAL
Exhibit 2
Page 275 of 379
1. Where it is necessary to provide intermediate submittals between the
initial and final submittals, provide and process intermediate submittals in
the same manner as for initial submittals.
2. Shop Drawings, Product Data and Samples submitted to the CPM and
the CONSULTANT for review shall first be checked and approved by the
CONTRACTOR. Shop Drawings, Product Data and Samples received
without the CONTRACTOR’s “check and approved” stamp will be cause
for immediate return without further action. Each drawing correctly
submitted will be checked by the CONSULTANT and marked accordingly.
3. Specific submittal requirements for individual units of Work are specified
in the applicable specification section. Except as otherwise indicated in
the individual specification sections, comply with the requirements
specified herein for each type of submittal.
4. In submitting shop drawings, product data, and similar items for review, at
least seven (7) copies shall be submitted, five (5) to the CONSULTANT
and two (2) to the CPM. This number includes two (2) for return to the
CONTRACTOR. If the CONTRACTOR desires more than two (2) copies
returned to him, he shall submit to the CONSULTANT with the initial and
subsequent transmittals the additional number desired up to a maximum
of an additional three (3) copies. If the CONSULTANT requires additional
copies, he will so inform the CONTRACTOR upon return of the reviewed
material. Additional copies of shop drawings will be requested in the case
where the subject matter shown thereon requires coordination of two (2)
or more Prime Contracts.
5. Shop and setting drawings shall present complete and accurate
information relative to all working dimensions, equipment weight
assembly and sectional view, all necessary details pertaining to
coordinating the Work of the Contract, lists of materials and finishes, parts
lists and the description thereof, lists of spare parts and tools where such
parts or tools are required, no-scale control diagrams for control wiring
Section 01340 Shop Drawings, Product Data and Samples Page 70