AGREEMENT between BROWARD COUNTY and Cummings ...

DIVISION 1 SPECIFICATIONS
SECTION 01255 CPEAM PROCEDURES
Exhibit 2
Page 240 of 379
F. County’s Standards of Construction:
1. Hazardous Materials.
a. ANY PRODUCT OR MATERIAL THAT CONTAINS ASBESTOS
MATERIAL SHALL NOT BE PERMITTED ON THIS PROJECT.
b. ANY LEAD-CONTAINING PAINT SHALL NOT BE USED ON
THIS PROJECT.
2. Building.
a. Materials and finishes used in the Work shall have a fire rating at
least equal to the rating required for the type space in which the
Work is to be performed.
b. No Work shall be performed which, when complete, will result in
the degradation of the fire rating for the space.
c. Any penetration of existing ceilings or walls which will break the
fire rating of the ceiling or wall shall be patched with 5/8” Type X
fire code sheetrock to the satisfaction of the CPM.
d. Any ceiling access panel now existing shall remain in its present
location and cannot be covered in a manner to prevent access.
e. Any ceiling, other than CONTRACTOR’s own space, that must be
accessed or crossed from above, will be done only with prior
permission of the CPM.
3. Electrical and Building Permits.
a. All Broward County Permits shall be obtained and displayed at the
Work site.
b. All Work shall conform to all applicable codes.
In addition, the County requires:
1. All conductors (power, lighting, control or communication)
shall be placed in conduit or routed by way of existing
approved cable trays.
2. ALL CONDUITS SHALL BE CONCEALED. (Special
permission may be granted for exposed conduit in shop
areas or some other places that are completely removed
from office, commercial and public areas).
3. Drawings show all Work to be performed. Drawings show
new branch or feeder circuits and identify panel and
Section 01255 CPEAM Procedures Page 35