AGREEMENT between BROWARD COUNTY and Cummings ...

PART - GENERAL
DIVISION 1 SPECIFICATIONS
SECTION 01340 – SHOP DRAWINGS, PRODUCT DATA AND SAMPLES
1.01 RELATED DOCUMENTS
A. Related Sections
1.02 DESCRIPTION
1. DIVISION 01 - GENERAL REQUIREMENTS Section(s):
01313 - CONSTRUCTION SCHEDULING MANAGEMENT SYSTEM
01315 - PROGRESS SCHEDULES (COMPUTERIZED CPM)
A. Work-Related Submittals:
1. The provisions of the Section apply to those required submittals that are
related to individual units of Work, not to administrative submittals, such
as payment requests, insurance certificates and progress reports.
2. In addition to specific provisions of the General Conditions regarding
Work-related submittals, the Technical Specifications Sections contain
submittal requirements.
3. Specific requirements in other Contract Documents sections shall take
precedence over the general requirements contained in this Section.
1.03 SUBMISSION AND APPROVAL SCHEDULE
Exhibit 2
Page 272 of 379
A. Immediately following development and acceptance of fully developed Progress
Schedule specified under Sections 01315 - PROGRESS SCHEDULES
(COMPUTERIZED CPM), prepare complete schedule of work-related submittals,
including shop drawings, product data, and samples. Submit within ten (10) days
of date required for establishment of Progress Schedule. Correlate Submittal
Schedule with listing of principal subcontractors, with listing of products or
procurements schedule.
B. Color Schedule: Submit separate listing of items requiring color selection by the
CONSULTANT in accordance with the Contract Documents.
C. The CONTRACTOR shall prepare and submit in electronic Excel Format and
hard copies in triplicate each to the CONSULTANT and CPM a completely
itemized Schedule of Shop Drawings, Product Data and Samples, listing each
and all such items as required under the specifications. Schedules shall indicate
for each required item:
1. Prepare Schedule in chronological sequence of first submittals.
2. Show category of submittal, generic description of work covered, activity
or event number on progress schedule, scheduled date for first
submission, and blank columns for actual date of submittal, resubmittal,
and final release or acceptance by CONSULTANT.
3. Identification as to pertinent Specification Division.
4. Item(s) involved.
5. Name of pertinent Subcontractor or supplier and the name of pertinent
manufacturer.
Section 01340 Shop Drawings, Product Data and Samples Page 67