AGREEMENT between BROWARD COUNTY and Cummings ...

DIVISION 1 SPECIFICATIONS - SECTION 01390 CONTROL OF WORK
good architectural and engineering, and construction management judgment in
their determinations as to acceptance of Work that is not in strict conformity but
will provide a finished product equal to or better than that intended by the
requirements of the Contract Documents.
1.03 COORDINATION OF CONTRACT DOCUMENTS
A. The Contract Documents and all referenced standards cited are essential parts
of the Contract Requirements. A requirement occurring in one is as binding as
though occurring in all. They are intended to be complementary and to describe
and provide for a complete Work. In case of discrepancy, figured dimensions,
unless obviously incorrect, shall govern over scaled dimensions. Cited standards
for materials or testing, and cited FAA Advisory Circulars and other standards
shall be considered as standard specifications.
B. Any table, gradation, size, dimension, rate, mix, method, nomenclature, pay item
number, basis of payment or method of measurement shown on the written
Contract Documents, will take precedence over any variance with the drawings.
C. The CONTRACTOR shall not take advantage of any apparent error or omission
in the various Contract Documents. In the event the CONTRACTOR discovers
any apparent conflict, error or discrepancy, he shall immediately call upon the
CPM for his/her interpretation and decision, and such decision shall be final.
1.04 CONSULTANT'S DRAWINGS
A. The Drawings furnished by the CONSULTANT consist of general drawings
showing such details as are necessary to give a comprehensive idea of the
construction contemplated. Roadway plans will show, in general, alignment,
profile grades, typical cross sections and general cross sections. Structure
plans, in general, will show in detail all dimensions of the Work contemplated.
B. When the structure plans do not show dimensions in detail, they will show
general features and such details as necessary to give a comprehensive idea of
the design and construction of the structure.
C. Not all conflicts are known within the Project area. Not all conflicts are shown on
the Drawings. The CONTRACTOR is solely responsible for the location and
protection of all equipment and facilities, which are to remain in service and in
place during and after completion of all Project Work.
1.05 FIELD NOTES
Exhibit 2
Page 286 of 379
A. Field notes and records shall be kept as layout work is accomplished. These
field notes and records shall be available for review by the CPM and
CONSULTANT as the Work progresses and copies shall be furnished to the
CPM at the time of completion of the Project. An inspection or checking of the
CONTRACTOR’s field notes or layout work by the CPM and the acceptance of
all or any part thereof, shall not relieve the CONTRACTOR of his responsibility to
achieve the lines, grades, and dimensions shown in the Drawings and
Specifications.
Section 01390 Control of Work Page 81