01.01.2015 Views

AGREEMENT between BROWARD COUNTY and Cummings ...

AGREEMENT between BROWARD COUNTY and Cummings ...

AGREEMENT between BROWARD COUNTY and Cummings ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Exhibit 2<br />

Page 290 of 379<br />

DIVISION 1 SPECIFICATIONS - SECTION 01400 QUALITY CONTROL SERVICES<br />

PART 1 - GENERAL<br />

1.01 DESCRIPTION<br />

A. General: This Section specifies administrative <strong>and</strong> procedural requirements for<br />

quality assurance/quality control testing services.<br />

1. Quality assurance/quality control testing services include inspections,<br />

tests, <strong>and</strong> related actions including reports, performed by the independent<br />

Test Laboratory under contract to the CONTRACTOR. Such services<br />

assist the CONTRACTOR in evaluating if the Work performed complies<br />

with the specifications or for use in evaluating construction related<br />

purposes. The CONTRACTOR may provide copies of test <strong>and</strong> inspection<br />

reports to the CPM upon request. Quality assurance/quality control<br />

testing costs are the responsibility of the CONTRACTOR <strong>and</strong> are a Cost<br />

of Work. They do not include Contract enforcement activities performed<br />

by the CPM or the CONSULTANT.<br />

2. Quality acceptance testing services include inspections, tests, <strong>and</strong> related<br />

actions including reports, performed by the independent Test Laboratory<br />

under contract to the <strong>COUNTY</strong>. Such inspection <strong>and</strong> testing services are<br />

intended to assist the CPM <strong>and</strong> the CONSULTANT in the determination<br />

that the Work performed meets with requirements specified or indicated.<br />

These services do not relieve the CONTRACTOR of responsibility for<br />

compliance with Contract Documents requirements.<br />

3. Payment for, <strong>and</strong> acceptance of, the Work will be made based on the<br />

Work installed meeting or exceeding the specifications as determined by<br />

the <strong>COUNTY</strong>’s quality acceptance testing results.<br />

B. Requirements of this Section relate to customized fabrication <strong>and</strong> installation<br />

procedures, not production of st<strong>and</strong>ard products.<br />

1. Inspections, test <strong>and</strong> related actions specified are not intended to limit the<br />

CONTRACTOR’s quality control procedures that facilitate compliance<br />

with Contract Documents requirements.<br />

2. Requirements for the CONTRACTOR to provide quality control services<br />

required by the Contract Documents, CPM, CONSULTANT, <strong>and</strong><br />

authorities having jurisdiction are not limited by provisions of this Section.<br />

1.02 TESTING BY THE <strong>COUNTY</strong><br />

A. The <strong>COUNTY</strong> will engage <strong>and</strong> pay for the services of a Testing Laboratory to<br />

perform quality acceptance inspections <strong>and</strong> tests specified for the work.<br />

1. Where the <strong>COUNTY</strong> has engaged a testing laboratory or other entity for<br />

testing <strong>and</strong> inspection of a part of the Work, <strong>and</strong> the CONTRACTOR is<br />

also required to engage an entity for the same related element, the<br />

CONTRACTOR shall not employ the entity engaged by the <strong>COUNTY</strong>,<br />

unless otherwise agreed in writing with the CPM.<br />

Section 01400 Quality Control Services Page 85

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!