Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
SECTION 08 71 00 - DOOR HARDWARE
PART 1 - GENERAL
1.1 SUMMARY
A. This Section includes the following:
1. Commercial door hardware for the following:
a. Swinging doors.
2. Cylinders for doors specified in other Sections.
B. Related Sections include the following:
1. Division 08 Section "Hollow Metal Doors and Frames".
2. Division 08 Section "Access Doors and Frames" for access door hardware.
C. Products furnished, but not installed, under this Section include the following. Coordinating,
purchasing, delivering, and scheduling remain requirements of this Section.
1. Permanent cores to be installed by The Authority’s Locksmith.
1.2 DOOR HARDWARE ALLOWANCE
A. The Contractor shall provide the specified permanent interchangeable lockset cores and keys to
The Authority’s Locksmith. After construction work is complete, The Authority’s Locksmith
shall remove the construction cores and shall install an airport master-keyed lock core. The
services of The Authority’s Locksmith shall be the responsibility of the Contractor.
1.3 SUBMITTALS
A. Product Data: Include construction and installation details, material descriptions, dimensions of
individual components and profiles, and finishes.
B. Samples for Initial Selection: For each finish, color, and texture required for each type of door
hardware indicated.
C. Product Certificates (Information Only): For electrified door hardware, signed by product
manufacturer.
1. Certify that door hardware approved for use on types and sizes of labeled fire doors
complies with listed fire door assemblies.
DOOR HARDWARE 08 71 00 - 1