Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
1. Product Data Manuals.
2. Complete set of Record Drawings.
3. Complete Test Reports.
4. Warranty and Close-Out Documents.
K. Product Data Manuals: upon completion of the project, submit final Product Data Manuals that
include:
1. A complete as-installed equipment list of all components installed with manufacturers'
names and model numbers.
2. A complete set of product data sheets for all products installed. Product data sheets shall
be clearly marked, identifying the specific items installed.
3. Updated and completed circuit schedule spreadsheets to reflect all voice and data
horizontal wiring (station wiring), backbone cable and pairs used on each backbone to
support each circuit, including circuit ID and user. This submittal shall be provided in
both hard copy and in electronic format.
4. Submit six (6) identical sets of Product Data Manuals with electronic copies of circuit
schedule spreadsheets in MS Excel format.
L. Record Drawings:
1. As-Built documents are to include updating and revising contract documents to record
actual locations (as-installed) of all equipment, pull boxes, devices, raceways, cabling,
outlets, communications rooms and all Premise Distribution cable infrastructure
components.
2. As-Built drawings shall include:
a. Complete floor plans and site plans, indicating placement and routing of asinstalled
raceways, outlet locations and types with labels and cabling facilities
installed under this scope of work.
b. A complete Premise Distribution System riser diagram, showing as-installed
originations, destinations, and type of pathways for all cabling. Include wire
numbers, terminal block numbers and layouts, and other designations.
c. Equipment rack/cabinet and wallboard as-installed elevation drawings shall be
provided for each communication room and termination location.
d. Wiring terminal point-to-point color-coded wiring diagrams. Drawings shall show
each item of equipment, locations, all wiring, and all connections. Wiring color
code shall be as described by the specifications. If no color code is specifically
mentioned, the color code shall be as recommended by the equipment
manufacturer.
3. Submit six (6) full-size sets of drawings.
4. Drawings shall be produced in the AutoCAD 2010.
5. Submit all drawing files on CD-ROM.
M. Test Reports: The Contractor shall be responsible for recording all test data. Copies of all test
results are to be submitted to the COTR for review as part of final acceptance and subsequently
submitted to The Authority for their records.
PREMISE WIRING DISTRIBUTION SYSTEM 27 10 00 - 7