Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
F. Any work penetrating concrete walls or floors shall require saw cutting and/or core drilling and
shall require approval by the COTR. X-ray is required in advance of any penetration deeper
than 1” in existing concrete elements.
1.9 CONTRACTOR QUALIFICATIONS
A. The PWDS Contractor shall be experienced in all aspects of this work and shall be required to
demonstrate direct experience on recent systems of similar type and size. The Contractor shall
own and maintain tools and equipment necessary for successful installation and testing of
optical and metallic premise distribution systems and have personnel who are adequately trained
in the use of such tools and equipment.
B. The Contractor or subcontractor shall employ a Building Industry Consulting Services
International (BICSI) Registered Communications Distribution Designer (RCDD) with a LAN
Specialist Certification to directly oversee the installation of all elements of the Premise Wiring
Distribution System.
C. A resume of qualification shall be submitted with the Contractor's bid. In addition to those
requirements, the Contractor shall submit the following information.
1. A list of (5) five completed PWDS projects over the past 5 years of similar type and size
with contact names and telephone numbers for each.
2. A list of test equipment proposed for use in verifying the installed integrity of fiber and
metallic cable systems on this project.
3. A technical resume of experience for the Contractor's Engineer and on-site installation
foreman who will be assigned to this project.
4. Similar documentation for any sub-Contractor who will assist the PWDS Contractor in
performance of this work.
1.10 QUALITY ASSURANCE
A. Standards of workmanship shall meet or exceed accepted telecommunications systems industry
installation practices.
B. Refer to Division 27 Section “Basic Telecommunication Requirements” and Division 01
Section “Quality Requirements” for quality assurance requirements.
1.11 SUBMITTALS
A. General: Comply with the requirements of Division 01 Section “Submittals.”
B. Additional submittal procedures are identified in Division 27 Section “Basic
Telecommunication Requirements” and in the individual technical specification.
C. Submittals shall include adequate descriptive literature, catalog cut sheets, shop drawings and
other data necessary for the COTR to ascertain that the proposed equipment and materials
comply with the specification requirements.
PREMISE WIRING DISTRIBUTION SYSTEM 27 10 00 - 5