Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 -CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
area requires security badging. Workers in this area are required to obtain and display an AOA
photo I.D. credential. Drivers in this area are required to obtain an Airport Vehicle Operator's
Permit for the Air Operations Area.
H. Beneficial Use: Use by The Authority prior to 100 percent completion and final acceptance.
I. Contract Documents: Documents containing requirements of the Work. These include all
Contract provisions and attachments made thereto or referenced therein.
J. Contract Provisions: The administrative and procedural requirements starting at Award Date
and ending at Final Acceptance, as provided for in Section VII, "Contract Provisions."
K. Contract Time or Duration (Time Limit): The number of calendar days established in
Section III, "Schedule," indicating the time allowed for the completion of all physical and
administrative work contemplated in the Contract, including any authorized extensions thereto.
L. Contracting Officer's Technical Representative (COTR): The Contracting Officer's designated
representative, as defined in Section VII, "Contract Provisions."
M. Contractor: Individual, partnership, corporation or joint venture under Contract to The
Authority for performance of prescribed Work.
N. Drawings: Erection/installation/construction plans, or any other supplementary plans or similar
graphic data, illustrating work to be performed that are provided to Contractor as part of the
Contract Documents.
O. Directed: A command or instruction by The Authority. Other terms including "requested,"
"authorized," "selected," "required," and "permitted" have the same meaning as "directed."
P. Final Acceptance: Refer to Division 01 Section "Project Closeout."
Q. "Indicated": Requirements expressed by graphic representations or in written form on
Drawings, in Specifications, and in other Contract Documents. Other terms including "shown,"
"noted," "scheduled," and "specified" have the same meaning as "indicated."
R. "Regulations": Laws, ordinances, statutes, and lawful orders issued by authorities having
jurisdiction, and rules, conventions, and agreements within the construction industry that control
performance of the Work.
S. "Furnish": Supply and deliver to Project site, ready for unloading, unpacking, assembly,
installation, and similar operations.
T. "Install": Operations at Project site including unloading, temporarily storing, unpacking,
assembling, erecting, placing, anchoring, applying, working to dimension, finishing, curing,
protecting, cleaning, and similar operations.
U. "Provide": Furnish and install, complete and ready for the intended use.
REFERENCES 01 42 00 - 2