22.01.2015 Views

Attachment 1: Specifications - Metropolitan Washington Airports ...

Attachment 1: Specifications - Metropolitan Washington Airports ...

Attachment 1: Specifications - Metropolitan Washington Airports ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012<br />

TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN<br />

RONALD REAGAN WASHINGTON NATIONAL AIRPORT<br />

PROJECT DT1203<br />

O. Horizontally separate boxes mounted on opposite sides of walls so they are not in the same<br />

vertical channel.<br />

P. Locate boxes so that cover or plate will not span different building finishes.<br />

Q. Support boxes of three gangs or more from more than one side by spanning two framing<br />

members or mounting on brackets specifically designed for the purpose.<br />

R. Fasten junction and pull boxes to or support from building structure. Do not support boxes by<br />

conduits.<br />

3.3 SLEEVE AND SLEEVE-SEAL INSTALLATION FOR ELECTRICAL PENETRATIONS<br />

A. Install sleeves and sleeve seals at penetrations of exterior floor and wall assemblies. Comply<br />

with requirements in Section 26 05 00 "Common Work Results for Electrical."<br />

3.4 FIRESTOPPING<br />

A. Install firestopping at penetrations of fire-rated floor and wall assemblies.<br />

3.5 PROTECTION<br />

A. Protect coatings, finishes, and cabinets from damage and deterioration.<br />

1. Repair damage to galvanized finishes with zinc-rich paint recommended by<br />

manufacturer.<br />

2. Repair damage to PVC coatings or paint finishes with matching touchup coating<br />

recommended by manufacturer.<br />

PART 4 - CONTRACTOR’S QUALITY CONTROL REQUIREMENTS<br />

4.1 QUALITY CONTROL<br />

A. Comply with applicable provisions of Division 01 Section “Quality Requirements” for<br />

requirements for Contractor Quality Control Program.<br />

END OF SECTION 26 05 33<br />

RACEWAYS AND BOXES FOR ELECTRICAL SYSTEMS 26 05 33 - 6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!