Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
1. Submit test reports in both printed format and an electronic format to assist the COTR in
the final review process. Printed test reports shall be provided in 8-1/2 x 11-inch three
ring binders. Electronic copies of the test reports shall be either in a file format that can
be imported or viewed using standard office software or in a file format used by the
testing software, provided the testing software program is also submitted with the raw
testing files.
2. Refer to the testing section of the specifications for details on the data that shall be
included in the test reports.
3. Submit six (6) printed copies of the test reports and six (6) electronic copies of the test
reports with the testing software program on CD-ROM.
N. The Contractor shall provide an "as-built" list of the initial patch cable connections that with the
Schedule of Outlets will enable the COTR to trace the circuit continuity of each voice and data
outlet to its point of demarcation.
1.12 WARRANTY
A. As specified in Division 27 Section: “Basic Telecommunication Requirements.”
PART 2 - PRODUCTS
2.1 GENERAL
A. All equipment shall be new and unused.
B. All equipment, materials, accessories, devices, and other facilities covered by this specification
or noted on the Contract Drawings shall be the best suited for the intended use and shall be
provided by a single manufacturer.
C. Provide all components, equipment, parts, accessories and associated quantities required for
complete installations and according to the manufacturer’s installation specifications. All
components may not be specified herein.
2.2 PRODUCTS
A. Copper tie cabling: as specified in Division 27 Section “Communications Backbone Cabling.”
B. Data copper terminations: as specified in Division 27 Section “Communications Backbone
Cabling.”
C. Patch panels: as specified in Division 27 Section “Communications Equipment Room Fittings.”
D. Voice copper terminations: Division 27 Section “Communications Equipment Room Fittings.”
PREMISE WIRING DISTRIBUTION SYSTEM 27 10 00 - 8