Attachment 1: Specifications - Metropolitan Washington Airports ...

More documents

Recommendations

Info

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012 TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN RONALD REAGAN WASHINGTON NATIONAL AIRPORT PROJECT DT1203 2.6 DOOR BOLTS A. Bolt Throw: Comply with testing requirements for length of bolts required for labeled fire doors, and as follows: 1. Mortise Flush Bolts: Minimum 3/4-inch throw. B. Dustproof Strikes: BHMA A156.16, Grade 1. C. Manual Flush Bolts: BHMA A156.16, Grade 1; designed for mortising into door edge. 1. Available Manufacturers: a. Adams Rite Manufacturing Co. (ARM). b. Glynn-Johnson; an Ingersoll-Rand Company (GJ). c. IVES Hardware; an Ingersoll-Rand Company (IVS). d. Stanley Commercial Hardware; Div. of The Stanley Works (STH). 2.7 LOCK CYLINDERS A. Standard Lock Cylinders: BHMA A156.5, Grade 1. 1. High-Security Lock Cylinders: BHMA A156.30, Grade 1. B. Cylinders: Manufacturer's standard tumbler type, constructed from brass or bronze, stainless steel, or nickel silver, and complying with the following: 1. Number of Pins: Seven. 2. Mortise Type: Threaded cylinders with rings and straight- or clover-type cam. a. High-Security Grade: BHMA A156.5, Grade 1A, listed and labeled as complying with pick- and drill-resistant testing requirements in UL 437 (Suffix A). C. Permanent Cores: Manufacturer's standard; finish face to match lockset; complying with the following: 1. Interchangeable Cores: Core insert, removable by use of a special key; usable with other manufacturers' cylinders. D. Construction Keying: Comply with the following: 1. Construction Cores: Provide construction cores that are replaceable by permanent cores. Provide 10 construction master keys. a. Furnish permanent cores to The Authority’s Locksmith for installation. E. Manufacturer: Same manufacturer as for locks and latches. F. Available Manufacturer (No Exception): DOOR HARDWARE 08 71 00 - 8
DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012 TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN RONALD REAGAN WASHINGTON NATIONAL AIRPORT PROJECT DT1203 1. Best Access Systems; Div. of The Stanley Works (BAS). 2.8 KEYING A. Keying System: 1. The Contractor shall provide the specified permanent interchangeable lockset cores and keys to The Authority’s Locksmith. The Authority’s Locksmith will re-pin cylinders into The Authority’s master key system. After construction work is complete, The Authority’s Locksmith shall remove the construction cores and shall install an airport master-keyed lock core. B. Keys: Nickel silver. 1. Stamping: Permanently inscribe each key with a visual key control number and include the following notation: a. Notation: "DO NOT DUPLICATE." 2. Quantity: In addition to one extra key blank for each lock, provide the following: a. Cylinder Change Keys: Three. b. Master Keys: Five. c. Grand Master Keys: Five. d. Great-Grand Master Keys: Five. 2.9 OPERATING TRIM A. Standard: BHMA A156.6. B. Materials: Fabricate from stainless steel, unless otherwise indicated. C. Available Manufacturers: 1. Burns Manufacturing Incorporated (BM). 2. Hager Companies (HAG). 3. IVES Hardware; an Ingersoll-Rand Company (IVS). 4. Rockwood Manufacturing Company (RM). 2.10 PROTECTIVE TRIM UNITS A. Size: 1-1/2 inches less than door width on push side and 1/2-inch less than door width on pull side, by height specified in door hardware sets. B. Fasteners: Manufacturer's standard machine or self-tapping screws. DOOR HARDWARE 08 71 00 - 9
Page 1:
TECHNICAL SPECIFICATIONS VOLUME I O
Page 4 and 5:
DCA TERMINAL A IMPROVEMENTS (NEAR T
Page 6 and 7:
THIS PAGE INTENTIONALLY LEFT BLANK
Page 8 and 9:
Page 10 and 11:
DCA TERMINAL A IMPROVEMENTS 10 AUGU
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185: DCA TERMINAL A IMPROVEMENTS (NEAR T
Page 196 and 197: THIS PAGE INTENTIONALLY LEFT BLANK
Page 254 and 255: DCA TERMINAL A IMPROVEMENTS 10 AUGU
Page 256 and 257: DCA TERMINAL A IMPROVEMENTS 10 AUGU
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500:
show all

Attachment 1: Specifications - Metropolitan Washington Airports ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?