Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM)10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 -CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
J. Certification: Submit certification that the supervisory personnel have the required training and
experience to perform their responsibilities within 30 calendar days after award of contract.
K. Warranty Draft: Submit two (2) draft copies of BHS warranty and “New Daylight Saving
Time” compliance warranty as specified herein for complete operating BHS for COTR’s
review. Submit concurrent with shop drawings and include all specified inclusions.
L. Operating/Maintenance Manuals:
1. Submit Operation and Maintenance Manuals as specified herein and in Division 01
Section “Operation and Maintenance Data”. 60 calendar days prior to completion,
submit a draft copy for review. The COTR shall indicate their approval or comments
related thereto and return the draft to the BHSC. Submit the final manual copies no less
than 30 calendar days prior to substantial completion or date of beneficial use, whichever
occurs first, as specified, but prior to training of personnel.
2. Final O & M Manuals: These Manuals shall be bound in an orderly manner in loose-leaf
lockable 3-ring binders with complete table of contents. A minimum of 15 sets shall be
provided. Contents shall be divided into sections separated by dividers with properly
labeled margin tabs. Manuals shall include the drawings as built, operating and
maintenance instructions, wiring diagrams, connections and complete parts list of all
items. Include manufacturer's literature, sources of purchase and similar information.
Content of manual shall be acceptable to the COTR.
a. In addition to the above, the operating section of the O&M Manual(s) shall include
the following:
1) Complete listing of electrical graphic symbols and reference designation per
ANSI standards for all electrical equipment/components contained in the
system(s).
2) Summary, location, units controlled, and function of Pushbuttons,
Photosensors, Limit Switches, etc.
3) Normal system start-up and shutdown procedures of conveyor system(s).
4) Detailed description of operational troubleshooting of the conveyor
system(s).
5) Electrical drawings:
a) Complete As-Built schematics.
b) Power and control device location layout.
c) Power and control device field termination.
d) Motor Control Panel (MCP) back panel layout diagram.
e) MCP door layout diagram.
f) Status panel layout diagram.
g) Control station face plate and legend layout diagram.
h) Programmable Logic Controller (PLC) ladder diagrams.
3. The O & M Manuals shall fully cover appropriate safety measures, precautions and
instructions to be followed before, during and after making repairs, adjustments, clearing
jams, or performing routine maintenance, which shall conform to all established Federal,
State, and Local Safety Laws and Regulations.
BAGGAGE HANDLING EQUIPMENT 34 77 16 - 11