Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
1.6 COORDINATION REQUIREMENTS
A. Coordination with Other Trades: The Contractor shall provide system technical requirements,
shop drawings and schedule coordination as required with the Trades performing work required
for the following Sections:
1. Division 08 Section “Door Hardware.”
1.7 WARRANTY
A. Warranties shall be executed in the perpetuity of The Authority.
B. Hardware Warranties shall extend for a minimum of One year following Project Acceptance by
The Authority.
1.8 SPARE PARTS
A. Unless stated otherwise provide the following quantity of extra materials:
1. Card Reader with PIN - 1
2. Audio/Visual Device - 1
3. Power Supply - 1
PART 2 - PRODUCTS
2.1 INTELLIGENT ACCESS CONTROL AND ALARM MONITORING PANEL
A. Acceptable Manufacturer/Model: The access control panel shall be Software House iStar Pro
Enterprise Control Panel with 64 Mbytes of memory, no substitutions.
B. Include all General Control Modules (GCM), Access Control Modules (ACM), input modules
(I8), output modules (R8) and power supplies as specified herein and as detailed on Sheet
SS04.002. Install per The Authority’s standard arrangement of control panel and power
supplies as detailed on Sheet SS0#.###. Any deviations from this standard must be approved in
advance by the COTR. Refer to the Contract Drawings for the standard arrangement for the
installation of the control panels and power supplies.
C. Panel and Card Reader Power Supplies: Each panel shall be provisioned with two
AL600ULACM power supplies as specified below.
D. The panel communications shall be Ethernet (10/100 Base-T) and shall be fully functional
during system and credential downloads.
E. Enclosure: The panel enclosure shall be a UL rated NEMA 1 style metal cabinet designed for
surface mounting. It shall have a tampered, hinged door with a high security key lock keyed
ACCESS CONTROL AND ALARM MONITORING SYSTEM 28 13 00 - 4