Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
1. The follow submittals shall be in addition to the requirements indicated in Division 01
Section “Submittals.” Increase by the quantity listed below, the number of related shop
drawings, product data, and samples submitted for Division 27 Sections.
a. Shop Drawings – Initial Submittal: 2 additional copies of each blue- or black-line
prints.
b. Shop Drawings – Final Submittal: 2 additional copies of each blue- or black-line
prints.
c. Product Data: 1 additional copy of each item.
d. Samples: 1 additional.
e. Additional copies may be required by individual Sections of these Specifications.
f. Test data: Submit all test data within 5 days of testing and as required by
individual sections.
2. Prepare coordination drawings detailing major elements, components, and systems of
electrical equipment and materials in relationship with other systems, installations, and
building components for related Division 27 Sections.
3. For related Divisions 27 and 28 Sections, indicate locations where space is limited for
installation and access. Indicate where sequencing and coordination of installations are
of importance to the efficient flow of the Work, including (but not necessarily limited to)
the following:
a. Provide complete front panel equipment fabrication dimensions with equipment
locations of equipment racks and cabinets.
b. Provide equipment wiring terminal point-to-point color-coded wiring diagrams.
Drawings shall show each item of equipment, locations, all wiring, and all
connections. Wiring color code shall be as described by the specifications. If no
color code is specifically mentioned, the color code shall be as recommended by
the equipment manufacturer.
c. All sheets shall be sized to match contract drawings and shall be executed in a neat
and professional manner (see Contract Drawings). All devices schematically
represented on wiring diagrams shall be identified with room numbers
corresponding to equipment locations in the building.
d. Submittal shall include block diagram of equipment to show equipment
relationship and signal flow paths.
4. Submittal information shall include the following manufacturer’s published data and
specific data for the system or equipment submittal for approval:
a. Complete operating instructions.
b. Complete schematic drawings for each item of equipment.
c. Complete maintenance instructions.
5. Prepare floor plans, elevations, and details to indicate penetrations in floors, walls, and
ceilings and their relationship to other penetrations and installations. Submittal shall
indicate the proposed locations of major raceway systems, equipment, and materials.
Include the following:
BASIC TELECOMMUNICATION REQUIREMENTS 27 05 01 - 2