Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
D. Product Data Submittals:
1. Product data submittals shall consist of catalog cut sheets, technical data sheets,
manufacturer specifications, brochures and/or diagrams necessary to illustrate a product,
material or system for some portion of the work.
2. Product data literature is required on all items of material and equipment and should be
clearly marked, identifying specific items proposed.
3. Indicate the UL listing and NEC insulation type for each type of cable installed as part of
the PWDS.
E. Shop Drawings shall include the following drawings:
1. Coordination Drawings: prepare and submit coordination drawings in detailing raceways
and system components and materials in relationship with other building systems and
components.
2. Detail Drawings: submit detailed drawings for:
a. Wall-mounted facilities on terminal backboards.
b. Equipment rack and cabinet elevations for all termination locations.
c. Detail drawings shall include clearances for servicing equipment, including space
for equipment disassembly required for periodic maintenance.
3. All sheets shall be sized to match Contract Drawings, shall be executed in a neat and
professional manner, and shall include a right hand margin title block (see Contract
Drawings).
F. Contractor shall also submit the following:
1. Contractor Qualifications.
2. Record Documentation.
3. Cable and equipment labeling schemes and sample labels.
4. Reel tests of fiber optic cable from the manufacturer. Submit test reports with,
manufacturers' specifications and any other information necessary to determine
compliance with published performance documents.
5. Test Reports. Refer to part 3 of the Specification for specific test and documentation
requirements.
G. Prior to assembling or installing the work, prepare and submit shop drawings and product data
literature for review.
H. The Contractor shall not purchase any materials or equipment prior to receipt of reviewed and
accepted Submittals from the COTR.
I. Review of product data shall not relieve the Contractor from responsibility for deviations from
the Drawings or specifications, unless the Contractor has, in writing, called attention to such
deviations at the time of submission and secured written approval.
J. Record documents: Comply with the requirements of Division 01 Section “Project Record
Documents.” Include:
PREMISE WIRING DISTRIBUTION SYSTEM 27 10 00 - 6