Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
1. Door Hardware
3 Pair Hinges
1 Ea. Lockset (Storeroom) BEST, 35H 7 EW 15 H 630
1 Ea. Lockset (Office) BEST, 35H 7 AW 15 H 630
3 Ea. Cylinders BEST, 1E-74 626
3 Ea. Closer
1 Ea. Kickplate
1 Ea. Wall Stop
1 Set Flushbolt
1 Ea. Dustproof Strike
1 Ea. Pull
1 Ea. Roller Catches
PART 2 - PRODUCTS
2.1 SCHEDULED DOOR HARDWARE
A. General: Provide door hardware for each door to comply with requirements in this Section, or
as acceptable to The Authority, and door hardware sets indicated in Part 3 "Door Hardware
Sets" Article.
1. Door Hardware Sets: Provide quantity, item, size, finish or color indicated, and products
equivalent in function and comparable in quality to named products except where noted
as no exception.
B. Designations: Requirements for design, grade, function, finish, size, and other distinctive
qualities of each type of door hardware are indicated in Part 3 "Door Hardware Sets" Article.
Products are identified by using door hardware designations, as follows:
1. Named Manufacturers' Products: Manufacturer and product designation are listed for
each door hardware type required for the purpose of establishing minimum requirements.
Manufacturers' names are abbreviated in Part 3 "Door Hardware Sets" Article.
2. References to BHMA Standards: Provide products complying with these standards and
requirements for description, quality, and function.
C. In other Part 2 articles where titles below introduce lists, the following requirements apply to
product selection:
1. Available Manufacturers: Subject to compliance with requirements, or as acceptable to
The Authority, manufacturers offering products that may be incorporated into the Work
include, but are not limited to, manufacturers specified except where specified “no
substitutions.”
DOOR HARDWARE 08 71 00 - 5