22.01.2015 Views

Attachment 1: Specifications - Metropolitan Washington Airports ...

Attachment 1: Specifications - Metropolitan Washington Airports ...

Attachment 1: Specifications - Metropolitan Washington Airports ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012<br />

TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN<br />

RONALD REAGAN WASHINGTON NATIONAL AIRPORT<br />

PROJECT DT1203<br />

2.4 LOCKS AND LATCHES, GENERAL<br />

A. Accessibility Requirements: Where indicated to comply with accessibility requirements,<br />

comply with the U.S. Architectural & Transportation Barriers Compliance Board's "Americans<br />

with Disabilities Act (ADA), Accessibility Guidelines for Buildings and Facilities (ADAAG),"<br />

ANSI A117.1, and FED-STD-795, "Uniform Federal Accessibility Standards."<br />

1. Provide operating devices that do not require tight grasping, pinching, or twisting of the<br />

wrist and that operate with a force of not more than 5 lbf.<br />

B. Latches and Locks for Means of Egress Doors: Comply with NFPA 101. Latches shall not<br />

require more than 15 lbf to release the latch. Locks shall not require use of a key, tool, or<br />

special knowledge for operation.<br />

C. Electrified Locking Devices: BHMA A156.25.<br />

D. Lock Trim:<br />

1. Levers: Wrought.<br />

2. Escutcheons (Roses): Wrought.<br />

3. Lockset Designs: BEST (Style 15 lever, Style H rose) no exceptions.<br />

E. Lock Throw: Comply with testing requirements for length of bolts required for labeled fire<br />

doors, and as follows:<br />

1. Mortise Locks: Minimum 3/4-inch latchbolt throw.<br />

F. Backset: 2-3/4 inches, unless otherwise indicated.<br />

G. Strikes: Manufacturer's standard strike with strike box for each latchbolt or lock bolt, with<br />

curved lip extended to protect frame, finished to match door hardware set, and as follows:<br />

1. Strikes for Mortise Locks and Latches: BHMA A156.13.<br />

2. Aluminum-Frame Strike Box: Manufacturer's special strike box fabricated for aluminum<br />

framing.<br />

2.5 MECHANICAL LOCKS AND LATCHES<br />

A. Lock Functions: Function numbers and descriptions indicated in door hardware sets comply<br />

with the following:<br />

1. Mortise Locks: BHMA A156.13.<br />

B. Mortise Locks: Stamped steel case with steel or brass parts; BHMA A156.13, Grade 1;<br />

Series 1000.<br />

1. Available Manufacturer (No Exception):<br />

a. Best Access Systems; Div. of The Stanley Works (BAS).<br />

DOOR HARDWARE 08 71 00 - 7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!