Attachment 1: Specifications - Metropolitan Washington Airports ...

DCA TERMINAL A IMPROVEMENTS (NEAR TERM) 10 AUGUST 2012
TASK ORDER 03: LOBBY IMPROVEMENTS – PKG 4 - CURBSIDE CHECK-IN
RONALD REAGAN WASHINGTON NATIONAL AIRPORT
PROJECT DT1203
1.5 SUBMITTALS
A. General: Comply with the requirements of Division 01 Section “Submittals.”
B. Additional submittal procedures are identified in Division 27 Section “Basic
Telecommunication Requirements” and in the individual technical specification sections.
C. Product Data Submittals:
1. Submit catalog cut sheets, technical data sheets, manufacturer specifications and/or
diagrams necessary to illustrate a product, material or system for some portion of the
work. Product data literature is required on all items of material and equipment and
should be clearly marked; identifying specific items proposed with a reference to the
specification requirement the item is being submitted for.
2. Product data shall include adequate descriptive literature and catalog cut sheets required
for the Engineer to ascertain that the proposed equipment and materials comply with
specification requirements.
D. Shop Drawings:
1. System Block Diagrams.
2. System Riser Diagrams.
3. Point-to-Point wiring diagrams.
4. Floor plans detailing device locations.
5. Equipment room layouts to scale.
6. Installation of video surveillance system equipment in cabinets and racks, including
wiring diagrams.
7. Installation of video surveillance system equipment located in the equipment rooms,
including wiring diagrams.
8. Interconnection with Ethernet Switch including block diagrams and wiring diagrams.
9. Details of interconnection to fiber optic backbone system.
10. Prepare using the latest release of AutoCAD and deliver files to the COTR.
VIDEO SURVEILLANCE SYSTEM 28 23 00 - 3