QF0159 Marketing Release Record
QF0159 Marketing Release Record
QF0159 Marketing Release Record
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Consumables<br />
BOND Aspirating Probe<br />
Cleaning System<br />
15 Cleaning Cycles CS9100 IVD<br />
The BOND Aspirating Probe Cleaning System contains reagents optimized to<br />
clean the aspirating probe of residual DAB. Sold in a standard reagent tray,<br />
the system is loaded onto BOND where a predefined cleaning protocol<br />
ensures maximum wash efficiency.<br />
BOND Mixing Stations<br />
5 Pack S21.1971<br />
BOND Mixing Stations are reusable inserts with six vials for mixing and<br />
catalyzing chromogens prior to slide application. Fresh chromogen promotes<br />
high quality staining. Replacing the mixing stations at recommended intervals<br />
ensures that the mixed chromogen does not become contaminated.<br />
BOND CT Cleaning Rack<br />
1 Rack S21.2129<br />
The BOND (CT) Covertile Cleaning Rack supports Covertiles to make<br />
cleaning simple and convenient.<br />
BOND Open Containers 7 mL<br />
10 Pack, minimum 200 Tests/container OP79193 IVD<br />
BOND Open 7 mL Containers allow the use of reagents from any source on<br />
the BOND system. Each container can be refilled until a total of 40 mL has<br />
been dispensed from it. They are ideal for reagents that are consumed<br />
intermittently and have a short shelf life.<br />
BOND Open Containers 30 mL<br />
10 Pack, minimum 200 Tests/container OP309700 IVD<br />
BOND Open 30 mL Containers allow the use of reagents from any source on<br />
the BOND system. Each container holds 30 mL and can be refilled until a<br />
total of 40 mL has been dispensed from it. They are ideal for high throughput<br />
reagents that are consumed on a daily basis and their use can minimize<br />
reagent preparation time.<br />
BOND Reagent Tray<br />
1 Tray S21.1003<br />
Additional BOND Reagent Trays let laboratories setup reagents for<br />
upcoming runs while other reagent trays are in use. This reduces setup<br />
delays and improves laboratory workflow.<br />
BOND Slide Labeler Cleaning Pen<br />
1 Pen S21.1913<br />
The BOND Slide Labeler Cleaning Pen is used to clean the print head on the<br />
BOND Slide Labeler. Regular cleaning helps ensure labels are printed<br />
clearly and correctly.<br />
BOND Slide Labeler Printing Ribbon<br />
1 Roll S21.1912<br />
BOND Slide Labeler Printing Ribbon produces high-quality, solvent-resistant<br />
labels when printing on BOND slide labels. This assists in preserving the<br />
integrity of patient data recorded on the BOND slide labels.<br />
BOND Slide Tray<br />
1 Tray S21.0304<br />
Additional BOND Slide Trays to allow laboratories to prepare slides while<br />
other trays are running. This reduces setup delays and improves laboratory<br />
workflow.<br />
BOND Titration Container Inserts<br />
50 Pack OPT9719 IVD<br />
BOND Titration Container Inserts are tubes that fit directly into the BOND<br />
Titration Containers. They enable safer use of up to 40 mL of reagent per<br />
titration container.<br />
BOND Titration Kit<br />
10 Titration Containers and 50 Titration Container Inserts<br />
OPT9049 IVD<br />
The BOND Titration Kit contains BOND Titration Container Inserts and BOND<br />
Titration Containers. The kit lets users optimize primary antibody concentrates<br />
on the BOND system. The kits can be re-used for different<br />
antibodies and are designed with minimal dead volume to preserve reagent.<br />
F Frozen I Immunofluorescence E Electron microscopy<br />
P Paraffin C Flow cytometry O Other applications<br />
W Western blotting<br />
/15<br />
BOND
Change language