Cisco Broadband Cable Command Reference Guide

cable privacy tek
2-124
Cisco Broadband Cable Command Reference Guide
Chapter 2 Cisco Cable Modem Termination System Commands
Note The cable privacy tek grace-time command is primarily intended for lab and testing use, and typically
should not be used for normal operations because it changes the grace time for all CMs on the cable
interface. To change the grace time for a particular cable modem, include the new value as part of the
Baseline Privacy Configuration Settings in the DOCSIS configuration file that is downloaded to the CM.
Examples The following example shows how to set the traffic encryption key grace-time to 800 seconds:
Router(config)# interface cable c5/1/0
Router(config-if)# cable privacy tek grace-time 800
Router(config-if)#
The following example shows how to set the traffic encryption key life-time to 800000 seconds:
Router(config)# interface cable c3/0
Router(config-if)# cable privacy tek life-time 800000
Router(config-if)#
Related Commands Command Description
cable privacy
add-certificate
Configures certificates for BPI+ encryption.
cable privacy Enables and configures BPI+ encryption on a cable interface.
cable privacy kek Sets key encryption keys and timeout periods.
option Determines whether a specific CM is online.
privacy Configures the BPI or BPI+ configuration parameters in a DOCSIS
configuration file.
show cable privacy Displays information about BPI status and operation.
show interface cable
privacy
Displays the current values of the KEK and TEK timers for an interface.
debug cable privacy Displays debug messages for BPI operation.
OL-1581-05