27.03.2013 Views

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 5 <strong>Cable</strong> CPE <strong>Command</strong>s<br />

snmp-server enable traps docsis-cm<br />

Syntax Description<br />

OL-1581-05<br />

snmp-server enable traps docsis-cm<br />

To enable one or more Simple Network Management Protocol (SNMP) traps for DOCSIS 1.1 events, use<br />

the snmp-server enable traps docsis-cm command in global configuration mode. To disable the SNMP<br />

traps, use the no form of this command.<br />

<strong>Cisco</strong> uBR905 and <strong>Cisco</strong> uBR925 cable access routers, and <strong>Cisco</strong> CVA122 <strong>Cable</strong> Voice Adapter<br />

snmp-server enable traps docsis-cm [bpi | bpkm | dccack | dccreq | dccrsp | dhcp | dsack | dsreq<br />

| dsrsp | dynsa | swupcvc | swupfail | swupinit | swupsucc | tlv]<br />

no snmp-server enable traps docsis-cm [bpi | bpkm | dccack | dccreq | dccrsp | dhcp | dsack |<br />

dsreq | dsrsp | dynsa | swupcvc | swupfail | swupinit | swupsucc | tlv]<br />

Defaults No traps are enabled. If no options are specified, all DOCSIS-related traps are enabled.<br />

<strong>Command</strong> Modes Global configuration<br />

<strong>Command</strong> History<br />

bpi (Optional) Enables Baseline Privacy Interface (BPI) initialization failure<br />

traps.<br />

bpkm (Optional) Enables Baseline Privacy Key Management (BPKM)<br />

initialization failure traps.<br />

dccack (Optional) Enables dynamic channel change acknowledgement failure<br />

traps.<br />

dccreq (Optional) Enables dynamic channel change request failure traps.<br />

dccrsp (Optional) Enables dynamic channel change response failure traps.<br />

dhcp (Optional) Enables DHCP failure traps.<br />

dsack (Optional) Enables dynamic service acknowledgement failure traps.<br />

dsreq (Optional) Enables dynamic service request failure traps.<br />

dsrsp (Optional) Enables dynamic service response failure traps.<br />

dynsa (Optional) Enables dynamic SA failure traps.<br />

swupcvc (Optional) Enables secure software upgrade code verification certificate<br />

(CVC) failure traps.<br />

swupfail (Optional) Enables secure software upgrade failure traps.<br />

swupinit (Optional) Enables secure software upgrade initialization failure traps.<br />

swupsucc (Optional) Enables secure software upgrade success traps.<br />

tlv (Optional) Enables unknown Type/Length/Value (TLV) traps.<br />

Release Modification<br />

12.2(8)YI This command was introduced on the <strong>Cisco</strong> uBR905 and <strong>Cisco</strong> uBR925<br />

cable access routers, and the <strong>Cisco</strong> CVA122 <strong>Cable</strong> Voice Adapter.<br />

<strong>Cisco</strong> <strong>Broadband</strong> <strong>Cable</strong> <strong>Command</strong> <strong>Reference</strong> <strong>Guide</strong><br />

5-165

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!