Cisco Broadband Cable Command Reference Guide

debug cable specmgmt
debug cable specmgmt
4-58
Cisco Broadband Cable Command Reference Guide
Chapter 4 Cisco Cable Modem Termination System Debugging Commands
To debug spectrum management (frequency agility) on the HFC network, use the debug cable
specmgmt command in privileged EXEC mode. To disable debugging output, use the no form of this
command.
debug cable specmgmt
no debug cable specmgmt
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Release Modification
11.3NA This command was introduced.
12.0(4)XI This command was removed and replaced by the debug cable
hw-spectrum command.
Usage Guidelines This command activates debugging of spectrum management (frequency agility) on the HFC network.
When this command is activated, any messages generated due to spectrum group activity will be
displayed on the Cisco CMTS console. Spectrum group activity can be additions or changes to spectrum
groups, or frequency and power lever changes controlled by spectrum groups.
Examples The following shows sample output from the debug cable specmgmt command:
Router# debug cable specmgmt
CMTS specmgmt debugging is on
Router#
reassign-blind: U0 not present or shutdown
OL-1581-05