Cisco Broadband Cable Command Reference Guide

Chapter 2 Cisco Cable Modem Termination System Commands
clear cable host
Syntax Description
OL-1581-05
Cisco Broadband Cable Command Reference Guide
clear cable host
To clear the host from the router’s internal address tables, use the clear cable host command in
privileged EXEC mode.
clear cable host {ip-address | mac-address}
Defaults No default behavior or values
Command Modes Privileged EXEC
Command History
Examples The following example shows how to remove a PC's MAC address from the router's internal address
tables on the Cisco CMTS:
Related Commands
ip-address IP address for the device to be cleared.
mac-address MAC address for the device to be cleared.
Release Modification
12.1 T This command was introduced.
router# clear cable host 0050.7366.17ab
Command Description
cable device Configures the access list for a CM device or host.
cable host Configures the access list for the specified hosts.
show cable device Display the CMs and the hosts behind the CMs on the network.
show cable host Displays only the hosts behind the CMs on the network.
2-261