Cisco Broadband Cable Command Reference Guide

setting the dynamic service flow timeout 2-139
setting the registration timeout timer (T9) 2-131
setting UGS-AD inactivity threshold 2-137
specifying a QoS profile 2-101
specifying QoS permissions 2-126
specifying vendor-specific options in the configuration
file 2-320
upstream rate-limiting
DOCSIS configuration file
2-240
creating 2-28
disabling network access 2-14
enabling and configuring BPI/BPI+ 2-339
enabling timestamp generation 2-484
enforcing CM downloads 2-199
setting the MAX CPE value 2-278
specifying a new software image 2-280
specifying an SNMP manager 2-478
specifying QoS options 2-341
specifying the downstream center frequency 2-282
specifying upstream channel ID 2-257
specifying vendor-specific fields 2-320
specifying vendor-specific options 2-320
DOCS-SUBMGT-MIG 2-164
download command
downstream
2-280
disabling and enabling RF output 2-57
enabling DOCSIS rate-limiting 2-52
enabling IF output 2-46
overriding frequency 2-51
overriding the frequency for a CM 2-96
sending a PRBS test signal 2-46
setting center frequency 2-44
setting channel ID 2-43
setting interleave depth 2-48
setting modulation format 2-50
setting RF output power level 2-55
DQoS timers 2-333
dtmf-relay command 5-44
Dynamic Channel Change (DCC) debugging 4-13
OL-1581-05
Cisco Broadband Cable Command Reference Guide
Index
Dynamic Host Configuration Protocol, see DHCP 4-17,
4-21
dynamic map algorithm, configuring 2-86, 2-89, 2-262, 2-362
dynamic services
setting the timeout value 2-139
E
ECC
displaying counters 3-60
displaying status 3-70
ECC counters, clearing 3-11
element-id, creating 2-329
element ID, creating a default 2-325
enabling rate-limiting
equalization coefficient
2-52
enabling on an upstream 2-214
Ethernet connections
EuroDOCSIS
3-3
interleave depth 2-48
setting Annex A or Annex B operation 2-41
support for GIADDR field 2-39
F
facility-alarm command
facility alarms
3-13
clearing 3-9
displaying status 3-35
setting thresholds
flap list
3-13
clearing 2-259
clearing CM counters 2-264, 2-266, 2-268
displaying 2-353
setting insertion time value 2-66
setting the list size 2-72
setting the miss threshold value 2-68
setting the power adjust threshold value 2-70
specifying aging value 2-64
IN-5