Cisco Broadband Cable Command Reference Guide

Chapter 3 Commands for the Cisco uBR10012 Router
OL-1581-05
Schedule
The following example shows a typical display for the schedule summary option:
Router# show hardware pxf cpu schedule summary
Cisco Broadband Cable Command Reference Guide
show hardware pxf cpu
FP average dequeue schedule rate in pps
Interface Level 1 Level 2 maximum 1min 5min 60min
-------------------- ---------- ---------- -------- -------- -------- -----
Total 32 / 32 1 / 1 3125000 0 % 0 % 0 %
Router#
The following example shows a typical display for the schedule option for a particular interface:
Router# show hardware pxf cpu schedule c5/0/0
FP average dequeue schedule rate in pps
Interface Level 1 Level 2 maximum 1min 5min 60min
-------------------- ---------- ---------- -------- -------- -------- -----
Cable5/0/0 1 / 32 1 / 1 97656 0 % 0 % 0 %
Router#
Table 3-10 describes the fields shown in the show hardware pxf cpu schedule command:
Table 3-10 Field Descriptions for the show hardware pxf cpu schedule Command
Field Description
Interface Identifies the cable interface or subinterface.
Level 1 Displays the number of occupied level 1 (port) wheel slots and the total
number of wheel slots for this interface or subinterface.
Level 2 Displays the number of occupied level 2 (channel) wheel slots and the total
number of wheel slots for this interface or subinterface.
maximum Displays the maximum number of packet dequeues per second.
1 min Displays the dequeue rate for the last 1-minute period.
5 min Displays the dequeue rate for the last 5-minute period.
60 min Displays the dequeue rate for the last 60-minute period.
Statistics
The following example shows a typical display for the statistics diversion option, which shows
chassis-wide statistics for PXF diversions, which occur whenever the PXF processor sends a packet to
the main route processor for special processing (such as errored packets, address resolution protocol
(ARP) packets, point-to-point protocol (PPP) control packets, and so forth).
Router# show hardware pxf cpu statistics diversion
Diversion Cause Stats:
local = 263171
dest = 0
option = 0
protocol = 0
encap = 541943
oam f5 seg= 0
oam f5 ete= 0
oam f4 seg= 0
3-53