Cisco Broadband Cable Command Reference Guide

Chapter 3 Commands for the Cisco uBR10012 Router
clear facility-alarm
Syntax Description
OL-1581-05
Cisco Broadband Cable Command Reference Guide
clear facility-alarm
To clear some or all of the facility alarms on the Cisco uBR10012 router, use the clear facility-alarm
command in privileged EXEC mode.
clear facility-alarm [critical | major | minor | source pem {0 | 1}]
Defaults If specified without any options, clears all facility alarms.
Command Modes Privileged EXEC
Command History
critical (Optional) Clears all critical alarms.
major (Optional) Clears all major alarms.
minor (Optional) Clears all minor alarms.
source pem {0 | 1} (Optional) Clears all alarms for either the first or second Power Entry
Module (PEM).
Release Modification
12.2(1)XF1 This command was introduced for the Cisco uBR10012 router.
Usage Guidelines The clear facility-alarms command clears some or all of the facility alarms that have occurred on the
Cisco uBR10012 router. Facility alarms occur when the temperature thresholds that are configured with
the facility-alarm command are exceeded. These alarms are displayed by the show facility-alarm
status command.
Examples The following example shows how to clear all facility alarms on the router:
Router# clear facility-alarm
Clearing all alarms
Router#
The following example shows how to clear all critical facility alarms on the router:
Router# clear facility-alarm critical
Clearing critical alarms
Router#
The following example shows how to clear all alarms for both PEM modules on the router:
Router# clear facility-alarm source pem 0
Router# clear facility-alarm source pem 1
Router#
3-9