Cisco Broadband Cable Command Reference Guide

Chapter 2 Cisco Cable Modem Termination System Commands
show hccp interface
Syntax Description
Command Modes Privileged EXEC
Command History
OL-1581-05
Cisco Broadband Cable Command Reference Guide
show hccp interface
To display information on all HCCP groups associated with a specific cable interface, use the show hccp
interface command in privileged EXEC mode.
show hccp interface interface [brief | detail]
interface The cable interface for which you want to display HCCP group information.
The information presented includes HCCP groups, configuration types,
member numbers, status, authentication algorithms, authentication key
chains, HCCP timers, Ip address assignments, and downstream switch
designations for the specified cable interface.
brief (Option) Displays a brief summary of the HCCP groups, configuration
types, member numbers, and status for a specified cable interface.
detail (Option) Displays a detailed summary of the HCCP groups, configuration
types, member numbers, and status for a specified cable interface.
Release Modification
12.1(3a)EC This command was introduced.
12.2(4)BC1 The detail option was added.
12.2(8)BC2 The current time to resync and current wait to restore was added to the brief
option.
12.2(11)BC1 Support was added for the N+1 RF Switch with the Cisco uBR7246VXR
router and Cisco uBR-MC16C, Cisco uBR-MC16S, and
Cisco uBR-MC28C cards.
Examples The following examples are from the show hccp interface cable 4/0 and show hccp interface cable 4/0
brief commands:
Router# show hccp interface cable 4/0
Cable4/0 - Group 1 Protect, enabled, blocking
authentication md5, key-chain "cisco1"
hello time 2000 msec, hold time 6000 msec
Member 1 standby
ip addr: working 10.20.111.11, protect 10.20.111.10
downstream wavecom (1.1.11.3/1, 1.1.11.3/2), upstream none
Router# show hccp interface cable 4/0 brief
Interface Config Grp Mbr Status
Ca4/0 Protect 1 1 standby
Router#
2-425