Cisco Broadband Cable Command Reference Guide

cable config-file
Related Commands
2-30
service-class 1 max-upstream 128
service-class 1 max-downstream 1000
timestamp
cable config-file disable.cm
access-denied
!
ip dhcp pool modems-c3
network 10.30.128.0 255.255.240.0
bootfile test.cm
next-server 10.30.128.1
default-router 10.30.128.1
option 7 ip 10.30.128.1
option 4 ip 10.30.128.1
option 2 hex 0000.0000
!
...
Cisco Broadband Cable Command Reference Guide
Chapter 2 Cisco Cable Modem Termination System Commands
Command Description
cable config-file Creates a DOCSIS configuration file and enters configuration file
mode.
access-denied Disables access to the network.
channel-id Specifies upstream channel ID.
cpe max Specifies the maximum number of CPE devices allowed access.
debug cable config-file Displays information about the DOCSIS configuration files that are
generated by the internal DOCSIS configuration file editor.
download Specifies the filename and server IP address for downloading a new
software image.
frequency Specifies the downstream frequency.
option Specifies options for the configuration file that are not provided for by
the other commands.
privacy Specifies privacy options for baseline privacy images.
service-class Specifies service class definitions for the configuration file.
snmp manager Specifies Simple Network Management Protocol (SNMP) options.
timestamp Enables time-stamp generation.
show running-config Displays the current run-time configuration, which includes any
configuration files that have been defined.
show startup-config Displays the current saved configuration, which includes any
configuration files that have been defined and saved.
Note For complete information on DOCSIS configuration files, see Appendix C in the DOCSIS 1.1 Radio
Frequency (RF) Interface Specification, available on the DOCSIS Cable Labs official web site at
http://www.cablemodem.com/specifications.html.
OL-1581-05