Cisco Broadband Cable Command Reference Guide

debug hccp timing
4-94
Cisco Broadband Cable Command Reference Guide
Chapter 4 Cisco Cable Modem Termination System Debugging Commands
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 3
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 6
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 2
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 4
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 5
May 31 10:21:13.726 HCCP 1 1 Protect: turn off "uc" - 1972 msec
May 31 10:21:13.790 HCCP 2 1 Protect: turn off "uc" - 2036 msec
May 31 10:21:14.422 HCCP 1 1 Protect: turn off "nru" - 696 msec
May 31 10:21:14.422 HCCP 1 1 Protect: unload config (if) - 0 msec
May 31 10:21:14.438 HCCP 1 1 Protect: unload config (subif) - 16 msec
May 31 10:21:14.702 HCCP 1 1 Protect: unload config (ds) - 264 msec
May 31 10:21:14.702 HCCP 1 1 Protect: become standby - 0 msec
May 31 10:21:16.078 HCCP 2 1 Protect: turn off "nru" - 2288 msec
May 31 10:21:16.078 HCCP 2 1 Protect: unload config (if) - 0 msec
May 31 10:21:16.078 HCCP 2 1 Protect: unload config (subif) - 0 msec
May 31 10:21:16.599 HCCP 2 1 Protect: unload config (ds) - 520 msec
May 31 10:21:16.599 HCCP 2 1 Protect: become standby - 0 msec
May 31 10:21:17.014 HCCP: P missed hello ack in LEARN state and is locked. Deactivate 4 1
May 31 10:21:17.014 HCCP 4 1 Protect: turn off "rfswitch" - 52 msec
May 31 10:21:17.593 HCCP 3 1 Working: turn on "rfswitch" - 0 msec
May 31 10:21:17.593 HCCP 3 1 Working: become active - 0 msec
May 31 10:21:18.112 HCCP 1 1 Protect: load config (if) - 0 msec
May 31 10:21:18.112 HCCP 1 1 Protect: load config (subif) - 4 msec
May 31 10:21:18.331 HCCP 1 1 Protect: load config (ds) - 100 msec
May 31 10:21:18.331 HCCP 2 1 Working: turn off "rfswitch" - 0 msec
May 31 10:21:18.331 HCCP 2 Cable5/0/1 Protect: resolve conflict Learn->Teach
May 31 10:21:18.331 HCCP 2 1 Protect: load config (if) - 0 msec
May 31 10:21:18.331 HCCP 2 1 Protect: load config (subif) - 0 msec
May 31 10:21:19.691 HCCP 2 1 Protect: load config (ds) - 76 msec
May 31 10:21:20.112 HCCP 2 1 Protect: turn on "rfswitch" - 48 msec
May 31 10:21:20.112 HCCP 2 1 Protect: become active - 0 msec
May 31 10:21:20.112 HCCP 2 1 Protect: load config (ds) - 76 msec
May 31 10:21:20.112 HCCP 2 1 Protect: turn on "rfswitch" - 48 msec
May 31 10:21:20.112 HCCP 2 1 Protect: become active - 0 msec
Related Commands Command Description
debug hccp
authentication
Displays authentication debug messages for HCCP groups.
debug hccp
Displays debug messages related to an RF or channel switch that is being
channel-switch used for HCCP N+1 redundancy.
debug hccp events Displays debug messages for all HCCP group interaction.
debug hccp inter-db Displays debug messages for the inter-database events during HCCP
operations.
debug hccp plane Displays debug messages for HCCP-related messages sent between the
router’s control plane and data backplane.
debug hccp sync Displays debug messages for HCCP synchronization messages.
OL-1581-05