27.03.2013 Views

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 5 <strong>Cable</strong> CPE <strong>Command</strong>s<br />

OL-1581-05<br />

profile 2:<br />

profile 3:<br />

Router#<br />

01 19 1D 03 00 00 00 00 00 00 00 00 00 00 00 00<br />

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />

01 19 1D 04 00 00 00 00 00 00 00 00 00 00 00 00<br />

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />

Table 5-11 describes the MIB statistics shown in the display for this command.<br />

Table 5-11 MIB Statistics Field Descriptions<br />

show controllers cable-modem mac<br />

Field Description<br />

DS fifo full Number of times the downstream receive buffer on the router has become<br />

full.<br />

Rerequests Number of registration requests sent by the router to the CMTS.<br />

DS mac msg overruns Number of times the DMA controller has had a downstream MAC message<br />

and there were no free MAC message buffer descriptors to accept the<br />

message.<br />

DS data overruns Number of times the DMA controller has had downstream data and there<br />

were no free data PDU buffer descriptors to accept the data.<br />

Qualified maps Number of valid MAP messages received by the router.<br />

Qualified syncs Number of times the router has received synchronization with the<br />

downstream channel.<br />

CRC fails Number of cyclic redundancy checks (CRCs) generated by the far-end<br />

device that did not match the checksums calculated from the message<br />

portions of the packets received.<br />

HDR check fails Number of cyclic redundancy checks (CRCs) generated by the far-end<br />

device that did not match the checksums calculated from the MAC headers<br />

of the packets received. The MAC header CRC is a 16-bit Header Check<br />

Sequence (HCS) field that ensures the integrity of the MAC header even in<br />

a collision environment.<br />

Data pdus Total number of data PDUs (protocol data units) of all types received by the<br />

cable interface.<br />

Mac msgs Number of MAC messages received by the cable interface.<br />

Valid hdrs Number of valid MAC headers received by the cable interface.<br />

Below the MIB statistics in the show controllers cable-modem 0 mac hardware display, the BCM3300<br />

registers section shows the DMA locations of the indicated processing routines of the Broadcom 3220<br />

MAC chip within the router.<br />

<strong>Cisco</strong> <strong>Broadband</strong> <strong>Cable</strong> <strong>Command</strong> <strong>Reference</strong> <strong>Guide</strong><br />

5-101

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!