Cisco Broadband Cable Command Reference Guide

show hardware pxf dma
3-66
Cisco Broadband Cable Command Reference Guide
Chapter 3 Commands for the Cisco uBR10012 Router
Related Commands Command Description
clear pxf Clears the direct memory access (DMA) and error checking and correcting
(ECC) error counters on the PXF processor.
debug pxf Enables debugging of the PXF subsystems on the active PRE1 module on
the Cisco uBR10012 router.
show hardware pxf
cable
show hardware pxf
cable interface
show hardware pxf
cpu
show hardware pxf
microcode
show hardware pxf
xcm
Displays information about the multicast echo and packet intercept features
for one or all cable interfaces.
Displays information about a particular service ID (SID) on a particular
cable interface.
Displays the display different statistics about the operation of the CPU
processor during PXF processing.
Displays identifying information for the microcode being used on the
processor.
Displays the current state of ECC for the External Column Memory (XCM)
on the PXF processor.
OL-1581-05