27.03.2013 Views

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 2 <strong>Cisco</strong> <strong>Cable</strong> Modem Termination System <strong>Command</strong>s<br />

Related <strong>Command</strong>s<br />

OL-1581-05<br />

Table 2-18 show cable flap-list <strong>Command</strong> Field Descriptions (continued)<br />

Field Description<br />

<strong>Cisco</strong> <strong>Broadband</strong> <strong>Cable</strong> <strong>Command</strong> <strong>Reference</strong> <strong>Guide</strong><br />

show cable flap-list<br />

Miss The number of times the CM misses the MAC layer keepalive<br />

message. An 8 percent miss rate is normal for the <strong>Cisco</strong> cable<br />

interface line cards. It can indicate intermittent upstream, laser<br />

clipping, or common-path distortion.<br />

CRC The number of cyclic redundancy check (CRC) errors from this<br />

CM. It can indicate intermittent upstream, laser clipping, or<br />

common-path distortion.<br />

P-Adj The number of times the headend instructed the CM to adjust<br />

transmit (TX) power more than 3 dB. It can indicate amplifier<br />

degradation, poor connections, or thermal sensitivity.<br />

Flap The sum of P-Adj and Ins values. CMs with high flap counts have<br />

high SIDs and might not register.<br />

Time The most recent time that the CM dropped the connection.<br />

Tip In <strong>Cisco</strong> IOS Release 12.1(12)EC, 12.2(8)BC1, and later releases, you can add a timestamp to show<br />

commands using the exec prompt timestamp command in line configuration mode.<br />

<strong>Command</strong> Description<br />

cable flap-list aging Specifies the number of days to keep a CM in the flap-list table before aging<br />

it out of the table.<br />

cable flap-list<br />

insertion-time<br />

cable flap-list<br />

miss-threshold<br />

cable flap-list<br />

power-adjust<br />

threshold<br />

Sets the insertion time interval that determines whether a CM is placed in the<br />

flap list.<br />

Specifies the miss threshold for recording a flap-list event.<br />

Specifies the power-adjust threshold for recording a CM flap-list event.<br />

cable flap-list size Specifies the maximum number of CMs that can be listed in the flap-list<br />

table.<br />

clear cable flap-list Clears all the entries in the flap-list table.<br />

debug cable flap Displays information about the operation of the CM flap list that is<br />

maintained for the cable interfaces.<br />

ping docsis Sends a DOCSIS ping to a CM and increments the flap-list counters as<br />

appropriate.<br />

show cable modem Displays information about all CMs on an interface or about a particular CM.<br />

2-355

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!