Cisco Broadband Cable Command Reference Guide

Chapter 2 Cisco Cable Modem Termination System Commands
privacy
Syntax Description
OL-1581-05
Cisco Broadband Cable Command Reference Guide
privacy
To create a DOCSIS configuration file that enables and configures the DOCSIS Baseline Privacy
Interface (BPI) option, use the privacy command in cable config-file configuration mode. To disable BPI
for the CM, use the no form of this command.
privacy grace-time {authorization value | tek value}
privacy timeout {authorize value| operational value| re-authorize value| reject value| rekey
value}
no privacy grace-time {authorization | tek}
Defaults No default behaviors or values
no privacy timeout {authorize | operate | re-authorize | reject | rekey}
Command Modes Cable config-file configuration
Command History
authorization value Authorization grace time in seconds. Valid values are 1 to 1800 seconds.
Default value is 600 seconds.
tek value TEK grace time in seconds. Valid range is 1 to 1800 seconds. Default is 600
seconds.
authorize value Authorize wait timeout in seconds. Valid range is 1 to 30 seconds. Default
value is 10 seconds.
operational value Operational Wait timeout in seconds. Valid range is 1 to 10 seconds. Default
is 1 second.
re-authorize value Re-authorize wait timeout in seconds. Valid range is 1 to 20 seconds.
reject value Authorize reject wait timeout in seconds. Valid range is 1 to 600 seconds.
Default is 60 seconds.
rekey value Rekey wait timeout in seconds. Valid range is 1 to 10 seconds. Default is 1
second.
Release Modification
12.1(2)EC1 This command was introduced.
12.2(11)BC2 This command was supported on the Release 12.2 BC train.
Usage Guidelines Specifying the privacy command without any of the keywords and arguments enables BPI encryption
and decryption for the CM.
2-339