Cisco Broadband Cable Command Reference Guide

option
Related Commands
2-324
Table 2-14 lists the two TLVs shown in this example:
Table 2-14 TLV Values to Enable the Cisco Cable Monitor
Type Length Value
Cisco Broadband Cable Command Reference Guide
Chapter 2 Cisco Cable Modem Termination System Commands
TLV 1—Vendor ID, Suboption 8
08 03 00:00:0C (the ID for Cisco cable equipment)
TLV2—Cisco IOS Command, Suboption 131
83 1D 69:70:20:68:74:74:70:20:63:61:62:6C:65:2D:6D:6F:6E:69:74:6F:
72:20:61:64:76:61:6E:63:65 (ASCII hexadecimal bytes for ip http
cable-monitor advance)
The following example shows the instance keyword being used to give multiple option 43 commands.
This example uses the same commands shown in the previous three examples.
router(config-file)# option 43 instance 1 hex 08:03:00:00:0C:01:04:05:7F:9F:90
router(config-file)# option 43 instance 2 hex 08:03:00:00:0C:80:07:69:6F:73:2E:63:66:67:
0A:01:02
router(config-file)# option 43 instance 3 hex
08:03:00:00:0C:83:1D:69:70:20:68:74:74:70:20:63:61:62:6C:65:2D:6D:6F:6E:69:74:6F:72:20:61:
64:76:61:6E:63:65
router(config-file)#
The following example shows an attempt to specify two options that cannot be specified through the
DOCSIS configuration file. Option 12 is reserved for the DOCSIS registration process, and Option 9
must be specified using the download command.
router(config-file)# option 12 ip 10.11.12.13
%Option 12 must not be specified manually
router(config-file)# option 9 ascii newsoftware.file
%Option 9 must be specified directly (not as raw option)
router(config-file)#
Command Description
cable config-file Creates a DOCSIS configuration file and enters configuration file
mode.
access-denied Disables access to the network.
channel-id Specifies upstream channel ID.
cpe max Specifies CPE information.
download Specifies download information for the configuration file.
frequency Specifies downstream frequency.
privacy Specifies privacy options for baseline privacy images.
service-class Specifies service class definitions for the configuration file.
snmp manager Specifies Simple Network Management Protocol (SNMP) options.
timestamp Enables time-stamp generation.
OL-1581-05