Cisco Broadband Cable Command Reference Guide

Chapter 5 Cable CPE Commands
OL-1581-05
Cisco Broadband Cable Command Reference Guide
docsis cvc mso
Tip These values are the same that are set using the docsdocsBpi2CodeCoSignerCodeAccessStart,
Bpi2CodeCoSignerCvcAccessStart, and docsBpi2CodeCoSignerOrgName attributes in the BPI+ MIB
(DOCS-BPI2-MIB).
Examples The following example shows the docsis cvc mso commands being used to configure the router for a
cosigned CVC from an organization named “MSO Organization” and with certificate access times of
midnight on March 1, 2002 Greenwich Mean Time:
Router(config)# docsis cvc mfg organization "MSO Organization"
Router(config)# docsis cvc mfg codeAccessStart 020301000000Z
Router(config)# docsis cvc mfg cvcAccessStart 020301000000Z
Router(config)#
Note You must set the organization name using the docsis cvc mso organization command before you can set
either access start time.
Related Commands Command Description
docsis cvc mfg Configures the access start times and organization name for the
manufacturer’s code verification certificate (CVC).
docsis cvc test Tests the root CA public key and CM private key that are installed
on the router.
5-41