Cisco Broadband Cable Command Reference Guide

clear cable modem offline
clear cable modem offline
Syntax Description
2-268
Cisco Broadband Cable Command Reference Guide
Chapter 2 Cisco Cable Modem Termination System Commands
To remove offline CMs from the internal address and routing tables for a cable interface, or to clear all
flap list counters for offline CMs on a cable interface, use the clear cable modem offline command in
privileged EXEC mode.
Defaults No default behavior or values
Command Modes Privileged EXEC
Command History
clear cable modem cable slot/port offline {counters | delete}
clear cable modem cable slot/subslot/port offline {counters | delete}
cable slot/port Identifies the a interface and downstream port on the Cisco uBR7100
series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can
be 0 or 1, depending on the cable interface.
cable slot/subslot/port Identifies a cable interface on the Cisco uBR10012 router. The
following are the valid values:
slot = 5 to 8
subslot = 0 or 1
port = 0 to 4 (depending on the cable interface)
counters Clears the flap list counters for all CMs that are currently offline.
delete Removes all CMs that are currently offline from the router’s internal
tables. The show cable modem command will no longer display these
CMs until they attempt to reregister with the CMTS.
Release Modification
12.2(11)BC3 This command was introduced for the Cisco uBR7100 series,
Cisco uBR7200 series, and Cisco uBR10012 universal broadband routers.
Examples The following example shows how to clear the counters for the offline CMs on a particular cable
interface:
Router# clear cable modem c3/0 offline counters
Router#
The following example shows how to delete all offline CMs from the router’s internal tables for a
particular cable interface, and to remove them from the show cable modem command displays:
Router# clear cable modem c3/0 offline delete
Router#
OL-1581-05