Cisco Broadband Cable Command Reference Guide

Chapter 2 Cisco Cable Modem Termination System Commands
OL-1581-05
02:15:54: 11271: -44 ******
02:15:54: 11283: -46 *****
02:15:54: 11295: -46 *****
02:15:54: 11307: -42 *******
02:15:54: 11319: -46 *****
02:15:54: 11331: -48 ****
02:15:54: 11343: -53 *
02:15:54: 11355: -55
02:15:54: 11367: -54 *
02:15:54: 11379: -57
02:15:54: 11391: -61
02:15:54: 11403: -60
02:15:54: 11415: -60
02:15:54: 11427: -60
02:15:54: 11439: -61
02:15:54: 11451: -57
02:15:54: 11463: -58
02:15:54: 11475: -67
02:15:54: 11487: -58
...
show controllers cable upstream spectrum
Tip In Cisco IOS Release 12.1(12)EC, 12.2(8)BC1, and later releases, you can add a timestamp to show
commands using the exec prompt timestamp command in line configuration mode.
Related Commands Command Description
cable modulation-profile Creates a cable modulation profile.
cable upstream
Determines the order of the corrective actions to be taken when ingress
hop-priority
noise exceeds the allowable value for an upstream.
cable upstream
Configures an upstream for one modulation profile (static profile) or two
modulation-profile modulation profiles (Dynamic Upstream Modulation).
show cable hop Displays the current hop period and threshold for an upstream, along with
other statistics.
show cable
modulation-profile
Displays the cable modulation profiles that have been created.
show controllers cable Displays detailed statistics for the cable interface.
Cisco Broadband Cable Command Reference Guide
2-409