27.03.2013 Views

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

show cable modem<br />

2-374<br />

Router# show cable modem phy<br />

MAC Address USPwr USSNR Timing MicroReflec DSPwr DSSNR<br />

(dBmV) (dBmV) Offset (dBc) (dBmV) (dBmV)<br />

0008.0e09.81f8 50.00 28.40 1705 26 -3.4 36.02<br />

0003.6b3c.1aa7 0.00 28.27 3643 0 0.00 -----<br />

0008.0e09.7fe2 35.00 28.44 1760 27 12.00 35.03<br />

<strong>Cisco</strong> <strong>Broadband</strong> <strong>Cable</strong> <strong>Command</strong> <strong>Reference</strong> <strong>Guide</strong><br />

Chapter 2 <strong>Cisco</strong> <strong>Cable</strong> Modem Termination System <strong>Command</strong>s<br />

Note The phy option will display valid values for the downstream power and SNR values only if the you have<br />

configured the cable modem remote-query command on the CMTS, and if the CM supports providing<br />

those options.<br />

The following example shows sample output for the mac option for a particular CM:<br />

Router# show cable modem 0010.7bb3.fcd1 mac<br />

MAC Address MAC Prim Ver Frag Concat PHS Priv DS US<br />

State Sid Saids Sids<br />

0010.7bb3.fcd1 online 1 DOC1.0 no no no BPI 0 0<br />

In <strong>Cisco</strong> IOS Release 12.2(8)BC2 and later 12.2 BC releases, the mac option displays both the<br />

maximum DOCSIS Version of the CM as well as the currently provisioned DOCSIS version. This allows<br />

you to see both the capabilities of the CM as well as its current provisioning.<br />

Router# show cable modem mac<br />

MAC Address MAC Prim Ver Prov Frag Concat PHS Priv DS US<br />

State Sid Saids Sids<br />

0010.64ff.e4ad online 1 DOC1.1 DOC1.0 yes yes yes BPI+ 0 4<br />

0010.f025.1bd9 init(rc) 2 DOC1.0 DOC1.0 no no no BPI 0 0<br />

0010.9659.4447 online(pt) 3 DOC1.0 DOC1.0 no yes no BPI 0 0<br />

0010.9659.4461 online(pt) 4 DOC1.0 DOC1.0 no yes no BPI 0 0<br />

0010.64ff.e459 online 5 DOC1.0 DOC1.0 no yes no BPI 0 0<br />

0020.4089.7ed6 online 6 DOC1.0 DOC1.0 no no no BPI 0 0<br />

0090.9607.3831 online(pt) 7 DOC1.0 DOC1.0 no no no BPI 0 0<br />

0090.9607.3830 online(pt) 1 DOC1.0 DOC1.0 no no no BPI 0 0<br />

0050.7366.12fb init(i) 2 DOC1.0 DOC1.0 no no no BPI 0 0<br />

0010.fdfa.0a35 online(pt) 3 DOC1.1 DOC1.1 yes yes yes BPI+ 0 4<br />

Router#<br />

In <strong>Cisco</strong> IOS Release 12.2(11)BC1 and later 12.2 BC releases, the mac option also supports the<br />

summary and total options. The summary option can be used alone or with the total option.<br />

Router# show cable modem mac summary total<br />

<strong>Cable</strong> Modem Summary<br />

-------------------<br />

Mac Version Provision Mode<br />

Interface Total DOC1.1 DOC1.0 Reg/Online DOC1.1 DOC1.0<br />

<strong>Cable</strong>5/1/0/U5 1 0 1 1 0 1<br />

<strong>Cable</strong>6/1/0/U0 11 0 11 8 0 8<br />

<strong>Cable</strong>6/1/1/U2 17 1 16 15 0 15<br />

<strong>Cable</strong>7/0/0/U0 2 0 2 1 0 1<br />

<strong>Cable</strong>7/0/0/U5 1 0 1 0 0 0<br />

Total: 32 1 31 25 0 25<br />

Router#<br />

OL-1581-05

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!