Cisco Broadband Cable Command Reference Guide

Supported Platforms and Cisco IOS Releases
Supported Platforms and Cisco IOS Releases
4-2
Cisco Broadband Cable Command Reference Guide
Chapter 4 Cisco Cable Modem Termination System Debugging Commands
Table 4-1 shows the supported platforms and minimum Cisco IOS releases documented at time of this
publication.
Note Not all Cisco IOS releases support all Cisco CMTS platforms. See the release notes for each Cisco IOS
release for details on which platforms are supported.
Table 4-1 Cisco Cable CMTS IOS Releases
Cisco IOS Release Platforms Supported Description
Cisco IOS Release 12.2(11)BC3 Cisco uBR7100 series routers,
Cisco uBR7200 series routers,
Cisco uBR10012 router
The 12.2 BC train is the Cisco cable-specific early
deployment release train that provides DOCSIS 1.1 and
other new feature support.
Cisco IOS Release 12.2(11)CY Cisco uBR10012 router Release 12.2(11)CY introduces support for the
Cisco uBR-MC5X20S cable interface line card.
Cisco IOS 12.1(13)EC Cisco uBR7100 series routers,
Cisco uBR7200 series routers
The 12.1 EC train is the Cisco cable-specific early
deployment “stable” release train.
Cisco IOS Release 12.0(16)SC3 Cisco uBR7200 series routers The 12.0 SC train was the previous Cisco cable-specific
“stable” release train for Cisco uBR7200 series routers.
This train excludes telco return, DOCSIS 1.0 extensions
support, Cisco UBR7246 VXR clock card feature set,
and the Cisco uBR-MC16S-based hardware and
software support.
Note The 12.0 SC has reached its end of life with the
12.0(16)SC3 release.
OL-1581-05