Cisco Broadband Cable Command Reference Guide

packetcable authorize vanilla-docsis-mta
2-328
Packet Cable Global configuration:
Enabled : Yes
Element ID: 12456
Max Gates : 1048576
Allow non-PacketCable UGS
Default Timer value -
T0 : 30000 msec
T1 : 300000 msec
T2 : 2000 msec
T5 : 500 msec
Router#
Related Commands Command Description
clear packetcable gate
counter commit
Cisco Broadband Cable Command Reference Guide
Chapter 2 Cisco Cable Modem Termination System Commands
Resets the counters that track the total number of committed gates, use the
clear packetcable gate counter commit command in Privileged EXEC
mode.
packetcable Enables PacketCable operations on the Cisco CMTS.
packetcable
element-id
Configures the PacketCable Event Message Element ID.
packetcable gate
maxcount
Changes the maximum number of PacketCable gate IDs in the gate database
on the Cisco CMTS.
packetcable timer Changes the value of the different PacketCable DQoS timers.
show packetcable gate Displays information about one or more gates in the gate database.
show packetcable gate Displays the total number of committed gates since system reset or since the
counter commit counter was last cleared.
show packetcable
global
Displays the current PacketCable configuration.
OL-1581-05