Cisco Broadband Cable Command Reference Guide

Chapter 2 Cisco Cable Modem Termination System Commands
OL-1581-05
cable flap-list power-adjust threshold
Related Commands Command Description
cable flap-list aging Specifies the number of days to keep a CM in the flap-list table before aging
it out of the table.
cable flap-list
insertion-time
cable flap-list
miss-threshold
Sets the insertion time interval that determines whether a CM is placed in the
flap list.
Specifies miss threshold for recording a flap-list event.
cable flap-list size Specifies the maximum number of CMs that can be listed in the flap-list
table.
clear cable flap-list Clears all the entries in the flap-list table.
debug cable flap Displays information about the operation of the CM flap list that is
maintained for the cable interfaces.
ping docsis Sends a DOCSIS ping to a CM and increments the flap-list counters as
appropriate.
show cable flap-list Displays the current contents of the flap list.
Cisco Broadband Cable Command Reference Guide
2-71