Cisco Broadband Cable Command Reference Guide

Audience
Audience
vi
Cisco Broadband Cable Command Reference Guide
Preface
This guide is intended for system administrators and support engineers who configure and maintain the
cable CMTS and CM devices.
Document Organization
Related Documents
This guide includes the following sections:
Title Description
Chapter 1, “Overview” Provides an overview of the Cisco Broadband Cable Command
Reference Guide, including the Cisco IOS releases that are
documented.
Chapter 2, “Cisco Cable Modem
Termination System Commands”
Chapter 3, “Commands for the
Cisco uBR10012 Router”
Chapter 4, “Cisco Cable Modem
Termination System Debugging
Commands”
This section lists the documents that provide more detailed hardware and software information about the
Cisco CMTS routers and Cisco Cable CPE devices documented in this guide. These documents are
available on Cisco.com and the customer documentation CD-ROM.
Cisco CMTS Hardware Installation and Software Configuration Guides
For detailed information about the Cisco CMTS platforms, see the following documents:
Cisco uBR7100 Series Hardware Installation Guide
Cisco uBR7100 Series Software Configuration Guide
Cisco uBR7200 Series Universal Broadband Router Hardware Installation Guide
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
Cisco uBR10012 Series Hardware Installation Guide
Cisco uBR10012 Series Software Configuration Guide
Cisco Cable Modem Termination System Feature Guide
Describes the cable-specific commands used to configure,
maintain, and troubleshoot the Cisco CMTS features.
Describes the commands that are specific to the
Cisco uBR10012 router and its Parallel Express Forwarding
(PXF) processors.
Describes the cable-specific debugging commands for the
Cisco CMTS routers.
Chapter 5, “Cable CPE Commands” Describes the cable-specific commands available to the family
of Cisco cable customer premises equipment (CPE) devices.
Index Comprehensive index for the entire manual.
OL-1581-05