Cisco Broadband Cable Command Reference Guide

Chapter 2 Cisco Cable Modem Termination System Commands
show interface cable service-flow
Syntax Description
Command Modes Privileged EXEC
Command History
OL-1581-05
show interface cable service-flow
To display the attributes of DOCSIS service flows on a given cable interface, use the show interface
cable service-flow command in privileged EXEC mode.
show interface cable {slot/port | slot/subslot/port} service-flow
show interface cable {slot/port | slot/subslot/port} service-flow sfid [classifiers | counters | phs |
qos] [verbose]
slot/port Identifies the cable interface and downstream port on the Cisco uBR7100
series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can be 0
or 1, depending on the cable interface.
slot/subslot/port Identifies the cable interface on the Cisco uBR10012 router. The following
are the valid values:
slot = 5 to 8
subslot = 0 or 1
port = 0 to 4 (depending on the cable interface)
sfid (Optional) Identifies the service flow index (1 to 65535).
classifiers [clid] (Optional) Displays all classifiers associated with this service flow or
optionally display information only for the specified classifier ID (clid,
1 to 65535).
counters (Optional) Displays the real-time counters for the service flow for a specific
SFID.
phs (Optional) Displays packet header suppression rules for the service flow for
a specific SFID.
qos (Optional) Displays QoS information for the service flow for a specific
SFID.
verbose (Optional) Displays detailed information on the service flow for a specific
SFID.
Release Modification
12.1(4)CX This command was introduced.
12.2(4)BC1 The command was changed so that the optional keywords are supported
only when displaying information for a specific service flow index.
12.2(8)BC1 The command was changed to remove the ability to display all service
flows, and a service flow index must now be specified.
Cisco Broadband Cable Command Reference Guide
2-447