Cisco Broadband Cable Command Reference Guide

cable telco-return enable
2-170
cable telco-return spd
password
cable telco-return spd
phonenum
cable telco-return spd
ppp-authenticate
cable telco-return spd
radius-realm
cable telco-return spd
service-provider
cable telco-return spd
threshold
cable telco-return spd
username
Cisco Broadband Cable Command Reference Guide
Chapter 2 Cisco Cable Modem Termination System Commands
Sets the password that the telco-return CM uses for authentication
when establishing a PPP connection.
Sets the telephone numbers that the telco-return CM dials when
connecting to the headend’s network access server.
Selects the authentication procedure to use when the telco-return CM
is establishing a PPP connection.
Selects a RADIUS server domain to use for the login response string.
Includes the service provider name in the SPD message.
Sets the number of failed dial-up connections that can occur before the
CM indicates a connection failure.
Sets the username that the telco-return CM uses for authentication
when establishing a PPP connection.
OL-1581-05